This seatback had a couple coats of dark stain on it and the grain was raised badly. I started sanding with 80 grit and went down to 100 and then 150 grit. I used a palm sander and also a wood block wrapped with sandpaper. I also wrapped sandpaper around a putty knife to get between the slats. There are other ways to get between but I didn't have the power tools like a fein sander.

Click image for maximum view
Date: 07/07/09 - 4:55 PM
Added by: Joe Kriz
Dimensions: 960 x 720 pixels
Filesize: 115.16Kb
Comments: 0
Number of views: 3004