1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Two Part Foam removal
Key-z	#1  Posted on 10/11/06 - 5:22 PM
Member Posts: 102 Comments: 5 Joined: 08/14/06	Does anyone know how to remove two part foam from the gask tank cavity.I've removed the thick wall but still have a thin coat on the wall of the cavity. Any suggestions would be appreciated. Key-z
fl22outrage	#2  Posted on 10/12/06 - 1:56 PM
Member Personal Page Posts: 6 Comments: 1 Joined: 09/24/05	I used a plastic scraper from Home Depot, the cheap $.99 one. Worked good and did not hurt the gelcoat. I never got it all off 100%, but the new foam took care of that. Once the tank is foamed back in you will forget about the old foam you could not get off.
Key-z	#3  Posted on 10/12/06 - 3:20 PM
Member Posts: 102 Comments: 5 Joined: 08/14/06	Thanks for the imformation. My concern was that with the residue still adhered to the walls, I was afriad the foam would not take. I'll try it. Thanks again, Key-z