Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I've have about a 4 sq in and some smaller areas of paint peel off of my Merc 200; Year 2000. Is this a Por15 type of repair? I have had mixed results using Por15 so far in a Marine environment. Have applied the Por15 with the UV resistant Top Coat. Is there a more applicable, better product?
The straight section of the lower end. Below the Engine and above the horizontal fins at the bottom. Just above where the motor comes down and hits the rubber bumpers for full tilt forward.
There was an Easy Steer bracket mounted there with hose clamps / rubber to steer the kicker. Easy Steer Rod between motors. The mount tore off and I am replacing it. The clamp rubbed off some of the paint there and now it is peeling a bit.
Outrage 18. It came with it when I bought it. When it broke was just dropping the main to act as a rudder....which seemed to work out ok. Except when it was windy and I was solo fishing, then I kinda missed it.
The thing about Mercury is Gloss Black is always Gloss Black. Automotive Dupla Color or Mercury brand paint. It Will all be Gloss Black krylon has some great exterior spray and It is a nice Gloss black as well.
