Garmin Data Cards
|
gorji |
Posted on 05/17/09 - 4:28 PM
|
Member
Personal Page
Posts: 31
Comments:
3
Joined: 05/06/05
|
Dear Freinds:
I am purchasing a Garmin Data Card for my Garmin 276c. Can U use this card in my Garmin 178c which also takes the Garmin Data Card? The 276c is portable and I used it often on other boats where my 178c is not present. Please note that I am not talking about their SD cards.
Can I assume that the data on the card will be unaffected by where the card is inserted? I won't be saving any data to the cards.
Thank you
Gorji
|
|
|
|
ioptfm |
Posted on 05/17/09 - 4:38 PM
|
Member
Personal Page
Posts: 1533
Comments:
3
Joined: 10/28/06
|
If it is the same size card it will work.........I have a Garmin 188c and I have used it in several other models with no problem. If it fits in the slot it should work with no problem
Tom
1979 Sport 15' |
|
|
|
gorji |
Posted on 05/17/09 - 5:27 PM
|
Member
Personal Page
Posts: 31
Comments:
3
Joined: 05/06/05
|
Thanks. I'd thought that the card may get modified once inserted into the GPS and become not useable in my other GPS.
|
|
|
|
greenshoe |
Posted on 05/17/09 - 6:10 PM
|
Member
Posts: 23
Comments:
0
Joined: 11/26/07
|
if you go to www.garmin .com site and scrool to the model machine you have it will come up with card it uses .good luck
|
|
|
|
ioptfm |
Posted on 05/17/09 - 6:52 PM
|
Member
Personal Page
Posts: 1533
Comments:
3
Joined: 10/28/06
|
gorji wrote:
I'd thought that the card may get modified once inserted into the GPS and become not useable in my other GPS.
If you look on the card itself you will see a small movable slot like the ones on a SD card that prevents anything from being written on it also.
Tom
1979 Sport 15' |
|
|
|
gorji |
Posted on 05/24/09 - 8:42 AM
|
Member
Personal Page
Posts: 31
Comments:
3
Joined: 05/06/05
|
A little update:
I purchased Canada East Garmin Data Card (preprogrammed). Inserted into my 276c and beautiful maps showed up.
Yesterday went to the boat which is 2 hours away. Put the same card in and my 178c took it but I never got past "reading card" message. I shut the GPS down and restarted. Same issue.
The SW version is 2.20 and Basemap Worldwide Marine version is 1.0 I have 2 theories on why it did not work:
1. It need a firmware update; none since 2006 and there have been several although none of the firmware descriptions state its needed to read the card.
2. My 276c put a code into the card so it can only be the GPS reading it.
Any thoughts?
To do a firmware update I will have to buy a Garmin Data Card Reader (US; another $40. It just does not end!!
Thank you
Gorji
|
|
|