1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

calling CES...
aiian	#1  Posted on 04/03/09 - 7:56 PM
Member Personal Page Posts: 25 Comments: 0 Joined: 11/30/08	I ordered a bimini top from iboats like yours, do you have any pictures of how and where exactly you mounted the hardware? thanks.
CES	#2  Posted on 04/03/09 - 8:05 PM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	aiian. I'll take some pictures in the morning if you'd like. Basically all I did to align the bimini top correctly was to position the top in the down position, aft. I made sure that while the top is down, it would not interfere with the raising and lowering of the motor or interfere with the steering either. After I figured out where I wanted the top while in the down position, I marked the spot and installed the mounts. Once I had the mounts on both the port and starboard sides attached, I adjusted the four straps and marked off where I wanted the attaching points for the straps. It was an easy process and the only help was from my 5 year old (he is seven now). I hope this helps. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
aiian	#3  Posted on 04/03/09 - 8:27 PM
Member Personal Page Posts: 25 Comments: 0 Joined: 11/30/08	Alright, I'm sure we can figure it out. I just wanted to make sure there wasn't going to be any tricky parts.