1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Bowlight for 13' from Specialty Marine
pirate	#1  Posted on 03/27/09 - 9:38 AM
Member Posts: 41 Comments: 0 Joined: 06/04/07	Has anyone purchased the bow light chock combo from Specialty Marine? My question is how does it fit with rub rail (factory)? Is there a gap between the top of the gunnel and the bottom of the base plate or is it molded as the original ones were to allow for the rub rail?
CES	#2  Posted on 03/27/09 - 1:43 PM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	I have one that is very simliar, if not the same thing. I had to make a "bushing" for it so it would fit properly. I have a few pictures of what I made so I could install the bow light/ chock bit. What year is your 13'? Mine is a 1966. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
pirate	#3  Posted on 03/27/09 - 7:37 PM
Member Posts: 41 Comments: 0 Joined: 06/04/07	Mine is a 1982' sport.
aiian	#4  Posted on 03/29/09 - 5:28 PM
Member Personal Page Posts: 25 Comments: 0 Joined: 11/30/08	CES, I'd be interested in seeing a picture of your "bushings." I just ordered one from Specialty marine.
CES	#5  Posted on 03/30/09 - 5:09 AM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	aiian. When I get to the house later today, I'll email them to you as the pictures are on my home computer. I have to made a spacer/bushing out of a truck mudflap.....as weird as that sounds. I traced out the bow light, measured where the holes where and then went from there. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker