1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Bronze Norman Pin
catchcan9	#1  Posted on 07/28/06 - 6:56 AM
Member Posts: 2 Comments: 0 Joined: 07/26/06	I have a 1969 13' and in need of the bow bronze norman pin. Can anyone help? Edited by Tom W Clark on 11/26/06 - 4:09 PM
John Fyke	#2  Posted on 09/12/06 - 5:39 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	I need one too. Anyone? John John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
Joe Kriz	#3  Posted on 09/12/06 - 7:30 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	There are quite a few really good Whaler dealerships across the country. Here are two that I visit but you may have a good one in your area. 1. http://www.twincitiesmarine.com/arine.com/ 2. http://www.outboardmotorshop.com/rshop.com/ If they can't get the part, then keep your eyes on eBay and of course, watch your posts here.
mashenden	#4  Posted on 09/18/06 - 11:25 AM
Member Posts: 4 Comments: 0 Joined: 09/18/06	You can get one from (among others) Twin Cities Marine twincitiesmarine.com, though it will likely be chrome plated and not the raw bronze finish of the early (c. 1960-1980) norman pins. With a bit of elbow grease I hear you can remove the chrome to get to the brass underneath. Talk to Sue, the parts manager.