1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

9 foot tender with hull # 6A0496
David Francis	#1  Posted on 07/24/06 - 11:57 AM
Member Posts: 1 Comments: 0 Joined: 07/24/06	Hi I am looking to see if anyone knows how to decode my hull # to gve me the year of my 9 foot tender. I recently bought it off of a guy in MA who said it was built in 1973, but the web site says the earliest ones were 1976?? PLease give insight 6A0496. dave
Joe Kriz	#2  Posted on 07/24/06 - 1:06 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	You should have a metal tag somewhere on your boat unless it has been removed. You gave us the stencil number. We need the number from the metal tag which is the HIN number. (Hull Identification Number) This number should start with BWC and some letters and numbers after that... If you cannot find your metal tag, then you will have to contact Boston Whaler directly. The Boston Whaler Catalogs don't start listing the 9 footer until 1977.... unless you have a Squall 9 footer... The squall has a centerboard....
Montauk77	#3  Posted on 07/26/06 - 6:12 AM
Member Posts: 14 Comments: 0 Joined: 04/21/06	Did the squalls have metal tags on them? There is no metal tag on mine.
Tom W Clark	#4  Posted on 07/26/06 - 10:45 AM
Member Personal Page Posts: 4280 Comments: 7 Joined: 09/30/05	Is the boat in question a 9' Squall or a 9' Tender?
dgewing	#5  Posted on 03/12/07 - 2:46 PM
Member Posts: 1 Comments: 0 Joined: 03/12/07	I have just purchased a PT Trawler and it has a 9ft Tender. Where can I get a cover for it? thanks dg
CHRIS TELLERICO	#6  Posted on 03/14/07 - 2:33 PM
Member Posts: 2 Comments: 0 Joined: 12/27/06	I have a 1975 11ft. anyone know where I could get a mills cover for it?
Nick A	#7  Posted on 03/19/07 - 10:42 PM
Member Posts: 1 Comments: 0 Joined: 03/14/07	So back to the original question. I have a 9ft with the metal plate at the back. That is the HIN number. On mine, I have 4 numbers, a space and then 3 numbers in a different font. As far as reporting the HIN number, do you report the first 4 or all 7? How do you find out what year it is? Thanks, Nick
Joe Kriz	#8  Posted on 03/19/07 - 11:03 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Nick A, In the Article section is a reference on how to "Decipher your HIN Serial Numbers". http://www.whalercentral.com/readarti...icle_id=61 You tag has worn off letters like many of these metal tags suffer. The tags all have, or had, Numbers and Letters. See these references: http://www.whalercentral.com/articles...p?cat_id=7 I'm going to take a wild guess at your number.. Well, Ok, not so wild but a guess anyway. BWC(AorB), and then your 4 numbers, then M, then 2 numbers and then probably a letter instead of the number you think. Something like this: BWCA6666M76I Sometimes it takes a magnifying glass and a flashlight and looking at it from different angles to try and make out the faded or missing letters. Of course, sometimes it is impossible. The last 3 or 4 digits tell us the month and year it was manufactured and the model year of the boat. Let us know what you have.... Edited by Joe Kriz on 03/20/07 - 12:26 PM