1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Bow light & Chock Assembly for an Outrage???
Tono	#1  Posted on 11/24/08 - 2:56 PM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/10/08	I would like to know if an Outrage I 17 ft.( 1991) has a bow light and chock assembly ? Thanks a lot for your help. Antonio (Tono)
Joe Kriz	#2  Posted on 11/24/08 - 3:27 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Tono, Just looking through all the photos we have on this site, I would say positively, yes. Whaler Model Specifications And then take a look at all the personal pages for 1990 to 1995 Outrage I http://www.whalercentral.com/viewpage...page_id=82 It looks like yours has it in the photos on your personal page Edited by Joe Kriz on 11/24/08 - 3:28 PM
95Outrage17	#3  Posted on 11/24/08 - 7:21 PM
Member Posts: 32 Comments: 0 Joined: 08/09/05	Hi Tono, My '95 Outrage 17 has two cleats on either side of the bow light which has a spacer underneath that is shaped to guide lines. I'm quite sure this is the original setup for my boat. A good friend of mine has a '91 Outrage 17 which I *think* is hull number 214 (A90214). I can't quite remember. I did extensive work on the boat last winter. It has the stern corner seats. At the bow it has the same setup as mine with the cleats, but the bow light does not have the spacer/rope guide underneath. I think it's bow light was replaced at some point. Unfortunate as the original light is nicer. I think the change from chocks to cleats at the bow happened concurrently with the change to stern seats...
Tono	#4  Posted on 11/24/08 - 7:25 PM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/10/08	Joe: Sorry, I mean something like this: http://www.whalercentral.com/readarticle.php?article_id=2 http://www.whalercentral.com/photogallery.php?photo_id=16 Cause mine is not an original part. Well, I guess so. Thank you
Phil T	#5  Posted on 11/24/08 - 7:47 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Tono - I have hull #175, a 1991 and it has the same setup as Chris, a raised bow light with a spacer and two separate cleats. Both of your links show the standard bow light for a classic Montauk. Here is the OEM arrangement: Phil T attached the following image: [34.61Kb] 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
95Outrage17	#6  Posted on 11/24/08 - 8:12 PM
Member Posts: 32 Comments: 0 Joined: 08/09/05	Hi Tono, As Phil noted, those pics you linked are of the Montauk 17 bow light/chock setup. This piece wouldn't fit an Outrage 17 properly due to it's pointed bow. Montauks are basically flat at the front and center of the bow. Tono wrote: Joe: Sorry, I mean something like this: http://www.whalercentral.com/readarticle.php?article_id=2 http://www.whalercentral.com/photogallery.php?photo_id=16 Cause mine is not an original part. Well, I guess so. Thank you
Joe Kriz	#7  Posted on 11/24/08 - 9:27 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Looks like Phil and 95Outrage17 have taken care of you. You most likely have the original on your boat then as shown in your personal page photos.
Tono	#8  Posted on 11/24/08 - 11:28 PM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/10/08	Joe,Chris & Phil T. Thank you all for your help. Now I know that my spacer is the original, but the bow light isn't. So, I only have to look for an original bow light. One more time, thank you all.