View Thread
Before Posting, Please Read Our Posting Guidelines Below.

1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

 Print Thread
73 13' BW with '08 50hp Suzuki?
73whaler13
#1 Print Post
Posted on 10/20/08 - 10:22 AM
Member
Personal Page

Posts: 13
Comments: 0
Joined: 07/09/07

A dealer in OR is closing out their '08 inventory and offered me a 50hp 4strk Suzuki for $4,400 (no sales tax in OR) plus Suzuki is adding a 6 year warranty plan at no additional cost. I was planning on repowering with a 40hp Suzuki, but they didn't have an 40's. The 50 is the same weight and size (20" shaft) as the 40. It's definately more motor than I planned on, but other dealers in my area can't come close to the price even for a 40.

Anyone here ever ran a 50 on a 13 whaler? I plan on moving my seating forward and I purchased a 12 gal tank to go under the forward. The battery will be located under the drivers seat. I may still need to add a little weight to the front locker, but hopefully not much. I put a deposit on the motor, but it's not too late to cancel my order. Any comments or concerns would be much appreciated.

 
CES
#2 Print Post
Posted on 10/20/08 - 10:31 AM
User Avatar
Member
Personal Page
Photo Albums
Project Albums

Posts: 2681
Comments: 7
Joined: 04/27/07

Sounds like a great deal to me. Just one word of advice, HOLD ON TIGHT!!!


Cliff
1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
 
1531665anthony
#3 Print Post
Posted on 10/21/08 - 10:18 AM
Member

Posts: 83
Comments: 3
Joined: 09/16/07

I HAD A 40 YAMAHA ON MY 13 AND THERE WERE TIMES THAT I WISHED FOR THE 50. GO FOR IT. YOU ARE GETTING A GREAT DEAL. DOES HE HAVE A 150 HP FOR A 19 OUTRAGE 1974 MODEL?
WHEN YOU LOAD THAT 13 DOWN WITH FAT MEN AND GEAR YOU WILL BE GLADE YOU HAVE THAT 50. THE ONLY THING IS THAT YOU MIGHT NOT BE ABLE TO INSURE THE BOAT BECAUSE THE 13 IS RATED FOR A 40. I WOULD STILL GET THE 50!:)

 
73whaler13
#4 Print Post
Posted on 10/21/08 - 10:40 AM
Member
Personal Page

Posts: 13
Comments: 0
Joined: 07/09/07

Insuring the boat could definately be a problem. I do keep it on a boat lift during the summer and in the garage during the winter, so it would be difficult for someone to steal it (although not impossible).

The problem that I'm running into now, is that my boat is not done being re-gelcoated. It was supposed to be done a couple of months ago, but it's not. The shop that I bought my new motor from is willing to hold it for me until my boat is ready to be rigged, but I'm nervous let them keep the motor not knowing when my boat will be ready. It seems like one shop after another is closing down and since I'm in Seattle and this shop is in Portland, it's not as if I can easily keep an eye on them.

I was planning on picking up the motor on Thursday, but they have taken it out of the crate. How would you guys transport a new motor that is not in a crate?

 
CES
#5 Print Post
Posted on 10/21/08 - 10:52 AM
User Avatar
Member
Personal Page
Photo Albums
Project Albums

Posts: 2681
Comments: 7
Joined: 04/27/07

Put some old tires in the back of your pickup truck, lay a balnket or something soft on top of that and then lay the motor down on it's side. Tie it down so it is snug and doesn't bounce around too much.


Cliff
1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
 
73whaler13
#6 Print Post
Posted on 10/21/08 - 11:41 AM
Member
Personal Page

Posts: 13
Comments: 0
Joined: 07/09/07

CES wrote:
Put some old tires in the back of your pickup truck, lay a balnket or something soft on top of that and then lay the motor down on it's side. Tie it down so it is snug and doesn't bounce around too much.


The dealer is telling me that if I transport the motor without it being rigged to my boat, that it may void my warranty. Any thoughts?

 
Binkie
#7 Print Post
Posted on 10/21/08 - 11:42 AM
User Avatar
Member
Personal Page

Posts: 2012
Comments: 0
Joined: 12/19/05

Many people run 50hp motors on their 15 footers. the two cylinder 50 OMC motors were a popular choice. I would go for it. I would bring the motor home, and rig it yourself. and get a credit from the dealer. Its really very simple to do, and instructions are provided with the controls. Just rent an engine hoist for a few dollars to make the lifting easily. If you have enough slack in your steering cable, or buy a new cable, move your entire interior forward 6 inches. It really makes a difference in the way the boat rides and handles. See Erik's remodel of his 13 footer.
If I didn`t have a raceboat when I feel the need for speed, I would have a 50 on my 13 footer instead of a 25.
rich


Rich
 
1531665anthony
#8 Print Post
Posted on 10/22/08 - 10:51 AM
Member

Posts: 83
Comments: 3
Joined: 09/16/07

why would that void the warenty they may want to sell you an instal. nothing is easy. good luck.

 
Derwd24
#9 Print Post
Posted on 10/22/08 - 11:09 AM
User Avatar
Member

Posts: 1607
Comments: 9
Joined: 05/09/07

Check into it more, Suzuki should allow you to rig it and not void the warranty. You could also bring it to a local dealer for inspection before the first time out, and they can confirm to Suzuki that the install was done properly, which will prevent any warranty claim issues in the future....


Dave - 1983 Outrage 22
 
73whaler13
#10 Print Post
Posted on 10/22/08 - 3:00 PM
Member
Personal Page

Posts: 13
Comments: 0
Joined: 07/09/07

They now tell me that I can rig the motor myself, but that I need to have an authorized Suzuki dealer inspect the motor before it is fired up for the first time. They also agreed to re-crate the motor and I'm going to pick it up tomorrow.

The stars must be aligned, because the shop called and said that my boat will be finished a week from this Friday. The hull will be ready to see this weekend. I'll take some pictures of both the new motor and new gelcoat soon.

 
burtim
#11 Print Post
Posted on 10/22/08 - 6:18 PM
User Avatar
Member
Personal Page

Posts: 178
Comments: 0
Joined: 02/10/08

I have the same boat with a Mercury 40. I sometimes wish I had more power. Be careful to pick a prop correctly for the loaded boat!

 
CES
#12 Print Post
Posted on 10/23/08 - 8:53 AM
User Avatar
Member
Personal Page
Photo Albums
Project Albums

Posts: 2681
Comments: 7
Joined: 04/27/07

Dude, that thing is going to scream!!! I drove a 1974 13' with a 2003 40hp Yami on the back and it was chine walking on me. My little girl was squeezing my arm like there was no tomorrow and I had to slow the boat down to a speed closer to what my slow Whaler does, about 32mph. I think the GPS read about 42mph.....pretty fast for a boat so low in the water. That 50 will scoot your Whaler along like Banshi!


Edited by CES on 10/23/08 - 8:53 AM
Cliff
1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
 
kamie
#13 Print Post
Posted on 10/23/08 - 2:50 PM
User Avatar
Member
Personal Page
Project Albums

Posts: 2975
Comments: 3
Joined: 11/04/05

73whaler13 wrote:
Insuring the boat could definately be a problem. I do keep it on a boat lift during the summer and in the garage during the winter, so it would be difficult for someone to steal it (although not impossible).


No problem on insurance, just tell the company what you have. If your current insurance company won't write a policy, PM me and I can give you the name of someone that will. The Insurance agent I use insures many whalers, including mine.

 
73whaler13
#14 Print Post
Posted on 10/24/08 - 10:23 AM
Member
Personal Page

Posts: 13
Comments: 0
Joined: 07/09/07

Thanks Kamie...I'll let you know if I run into any trouble with the insurance.

I picked the motor up yesterday along with the side control, wiring harness, and rigging kit. I wasn't sure how long the shift cables need to be, so I didn't buy those. I'll post some photos this weekend of the finished hull and motor.

 
Jump to Forum:
Bookmark and Share
Today's Date & Time
November 26, 2024 - 6:31 AM
Visit our Sponsors
Wm. J. Mills and Co. - Boston Whaler Canvas


Specialty Marine - Parts and Accessories


Carver Covers - The Best Covers Under The Sun


Nauset Marine - Whaler Parts and Accessories



Click on logo to visit site
View all Sponsors Here
Users Online
Welcome
AuntiesMontauk
as the newest member

· Guests Online: 10
· Members Online: 0
· Total Members: 50,390
Login
Username

Password

Remember Me


Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Top 5 Models Posted
· Montauk 17 1,638
· Sport 13 1,366
· Outrage 18 556
· Nauset 16 402
· Sport 15 365

View all Models Here
Render time: 0.19 seconds Copyright WhalerCentral.com © 2003-2024 86,560,933 unique visits