1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1969 13' whaler cable linkage???
mpro74	#1  Posted on 08/21/08 - 3:49 PM
Member Personal Page Posts: 17 Comments: 1 Joined: 05/10/08	Hello, I was looking for a picture of the cable linkage for the controls on a 1982 25 hp evinrude.......I have a 1969 13' whaler... I have been using the boat with tiller and i would like to start using the steering and controls........ My 25hp is capable of shift and throttle hook ups but i do not know what i need as far as cables and adapters ect.........Any one know what i need to hook it up?? or link to pict...or other site???? also is 8' the correct length for the cables??? Thanks
Joe Kriz	#2  Posted on 08/21/08 - 4:09 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	You might try this as a starting point. http://www.whalercentral.com/readarti...icle_id=81
mpro74	#3  Posted on 08/21/08 - 4:13 PM
Member Personal Page Posts: 17 Comments: 1 Joined: 05/10/08	Joe Kriz wrote: You might try this as a starting point. http://www.whalercentral.com/readarti...icle_id=81 Thanks...........But i am looking for the engine controls i have the modern tele-flex style for steering.......
John Fyke	#4  Posted on 08/21/08 - 6:44 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	I want to say 9' but someone will chime in. Don't cut yourself short. John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
Joe Kriz	#5  Posted on 08/21/08 - 7:04 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	mpro74 wrote: Hello, I have been using the boat with tiller and i would like to start using the steering and controls........ Thanks Your question through me off as I quoted above... So all you want is the engine control cables. Do you have the engine controls?
CES	#6  Posted on 08/21/08 - 7:15 PM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	I think mine are 8 feet long. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
chrepp	#7  Posted on 08/21/08 - 7:52 PM
Member Personal Page Posts: 80 Comments: 4 Joined: 06/02/08	My cables are 8'. Usually cables and control run about $75 used to $200 new (from what I have seen). Email me for pics on how mine are attached. Edited by chrepp on 08/21/08 - 7:54 PM
Binkie	#8  Posted on 08/22/08 - 5:19 AM
Member Personal Page Posts: 2012 Comments: 0 Joined: 12/19/05	Here are some pictures of the control ends and a picture of the shift and throttle box on my 13 footer. The cables are 8` I don`t know if its possible to buy new control ends from OMC any more. I have used these same controls on a restored `58 Evinrude 35 Lark, and also on a `99 Johnson 25, they will fit all 2 cylinder and other OMC motors in between those years. I have since installed an `08 Merc on the boat so my control box and cables are not being used. If you are interested, I can sell them to you for $125. the cables are one year old, the box and control ends are used. If interested I can take a picture of the entire unit. I am in Central Fl. rich http://i27.photobucket.com/albums/c19...hnson6.jpg http://i27.photobucket.com/albums/c19...nson10.jpg http://i27.photobucket.com/albums/c19...itled2.jpg