1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

trailer springs
madbarry0223	#1  Posted on 07/17/08 - 2:09 PM
Member Posts: 4 Comments: 0 Joined: 04/25/08	i am replacing the springs on my trailer for my 17' montauk. what is the load weight of the boat so i can install the correct springs
Binkie	#2  Posted on 07/17/08 - 3:03 PM
Member Personal Page Posts: 2012 Comments: 0 Joined: 12/19/05	You want to buy springs that match the maximum carrying weight for the trailer. It should be on the ID plate for the trailer. If your trailer itself is too small to carry your boat, putting heavier springs on the trailer is not the right path to take. rich
greenshoe	#3  Posted on 07/17/08 - 3:41 PM
Member Posts: 23 Comments: 0 Joined: 11/26/07	mabarry ,i have a 1981 montuk weigh boat alone is 900 lbs. put you have to add motor , gas, and etc, there is a spring shop in BROCTON MA, called WOODWARD SPRING ON MONTELLO STREET in your area bring the old ones thay will match up good luck
madbarry0223	#4  Posted on 07/18/08 - 12:17 PM
Member Posts: 4 Comments: 0 Joined: 04/25/08	thanks, the trailer came with the boat and is plenty big enough i just didn't know what to replace them with