1969 13' Sport
|
mpro74 |
Posted on 06/22/08 - 2:54 PM
|
Member
Personal Page
Posts: 17
Comments:
1
Joined: 05/10/08
|
[img]After searching for some time, I think i found a really decent 1969 13' sport......See pictures,
All Wood Mahogany is intact (needs sanding/varnish) there is 0 repair work done on the boat it is dry and proper weight, seems all original. It Has some spider cracking but very minimal.
Serial # is28813 and clearly visible in white on the blue interior I know you guys out there will know more about these boats. Please post any info.
I plan on using it this season, and redo over the winter.... Any advise or recommendations would be appreciated.
Thanks
mpro74 attached the following image:
[66.69Kb]
Edited by mpro74 on 06/22/08 - 3:14 PM |
|
|
|
mpro74 |
Posted on 06/22/08 - 3:17 PM
|
Member
Personal Page
Posts: 17
Comments:
1
Joined: 05/10/08
|
Another Pic
mpro74 attached the following image:
[59.74Kb]
|
|
|
|
mpro74 |
Posted on 06/22/08 - 3:18 PM
|
Member
Personal Page
Posts: 17
Comments:
1
Joined: 05/10/08
|
One more
mpro74 attached the following image:
[69.44Kb]
|
|
|
|
CES |
Posted on 06/22/08 - 7:12 PM
|
Member
Personal Page
Photo Albums
Project Albums
Posts: 2681
Comments:
7
Joined: 04/27/07
|
Nice looking boat, great find!!
Cliff
1966 13' Sport with a 1993 40hp Yamaha 2 Smoker |
|
|
|
Derwd24 |
Posted on 06/22/08 - 7:44 PM
|
Member
Posts: 1607
Comments:
9
Joined: 05/09/07
|
Get a decent engine, put the rig in the water, and drive it like you stole it for the summer!
Dave - 1983 Outrage 22 |
|
|
|
Binkie |
Posted on 06/22/08 - 8:04 PM
|
Member
Personal Page
Posts: 2012
Comments:
0
Joined: 12/19/05
|
Nice find. You may have to look for a while in order to find a nice short shaft motor unless your into the antique motors.
Rich
|
|
|
|
mpro74 |
Posted on 06/23/08 - 1:15 PM
|
Member
Personal Page
Posts: 17
Comments:
1
Joined: 05/10/08
|
I was looking since winter.....The good thing is that i already have a really nice 1982 evinrude 25hp electric start 15" shaft outboard......It is a tiller but I think that i am going to start looking for the controls....Anyone know what cable length that I would need for it? or where to start looking?
I will post more pics as i have installed the motor and some seats.....
Also I paid $1000 for it...........
|
|
|