1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

kicker motor
bigdito218	#1  Posted on 04/07/08 - 7:50 PM
Member Posts: 2 Comments: 0 Joined: 12/09/07	Can anybody tell me if a 8 hp yamaha 4 stroke at 80 lbs. is to heavy for a 1984 17' Montauk with a 90 on the back
Phil T	#2  Posted on 04/07/08 - 8:13 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	What brand and model year is the 90 hp. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
DaveS	#3  Posted on 04/07/08 - 9:14 PM
Member Posts: 69 Comments: 1 Joined: 04/22/05	If memory serves me correctly, the max rated weight for the classic hull was 410 pounds according to some of the brochures I've seen. I know I had a 4-stroke 5 hp merc with a 1993 90hp Evinrude on my last whaler, a classic 17' hull without any problems.
Pete	#4  Posted on 04/08/08 - 8:58 AM
Member Posts: 79 Comments: 0 Joined: 12/27/06	I have a 84 Montauk with a Johnson 90 . I have bolted an 4 stroke Johnson 8 hp kicker on the transom. I have my oiler in the console and the battery in the port stern. The boat sits fine and the splash well drains are just above the water line at rest without me in the boat. I moved the battery into the console this winter and added a CMC (4.5" 2 piece manual) plate to raise the engine and move it back. This modification I do not like. The water is now 2" inches higher at rest in the stern and into the splash well without me in the boat. I'm taking it off and raising the engine on the transom. The benefit is I ran great witout my Doel Fins and no porpoising. Pete