1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

REPOWERING 22 FT OUTRAGE
Bob Moravek	#1  Posted on 03/11/08 - 2:09 PM
Member Posts: 42 Comments: 0 Joined: 03/11/08	I JUST PURCHASED A 1991 22 FT OUTRAGE THAT NEEDS TO BE RE-POWERED. I WAS THINKING OF A 150 HP E-TEC - ANYONE HAVE ANY GOOD COMMENTS OR ADVICE - THIS WILL BE REPLACING A OLD TIRED 200 HP. WILL THE 150 HP BE ENOUGH POWER?? THANKS
Joe Kriz	#2  Posted on 03/11/08 - 2:58 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	The 150 E-Tec weighs the same as the 200 E-Tec. http://www.whalercentral.com/readarti...icle_id=30 I personally would not put anything less than a 200 hp on a Classic 22' Outrage. My prior Outrage 22' Cuddy had a 175 on it and it was OK, however, if I would have ever needed to replace that engine, a 200 hp would have been mounted on the transom.
Phil T	#3  Posted on 03/11/08 - 4:40 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Bob - Welcome to WC. Your Outrage 22 has a rating of 90 hp as a minimum and 240 hp as a maximum. I agree with Joe. I think an E-TEC is a great solution. I think Doug V and Jeff will recommend this as well. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
oliver1234	#4  Posted on 03/11/08 - 6:49 PM
Member Personal Page Posts: 114 Comments: 0 Joined: 10/02/07	Max hp is always the best way to go. twins are always good on a larger boat if you can aford it, but i wouldnt use less than 200hp.
Doug V	#5  Posted on 03/11/08 - 7:27 PM
Member Personal Page Posts: 340 Comments: 3 Joined: 09/21/05	I have an old 200 Suzuki on my Outrage. It moves out nicely with 200 HP. I agree with the above statements, 200 HP would be preferred to less than 200 HP. I think an Etec 200 would be a great engine on an Outrage 22...., but it would be really cool to have a 225 on it...., or since I am already in dream land, how about twin 115 Etecs! If you are of the 4 stroke persuasion, I think a Suzuki 200 or 225 would work well also. Doug