Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Anyone know where I can get/purchase the vinyl/rubber tubing that covers about 9" of the swing bar on a leaning post. This bar swings up and down over the cooler. It attaches to the leaning post legs and near the attaching bolts there is about 9" of tubing covering the bar, on each side, to protect the bar from the lower support bar. I just had the leaning post aluminum powder coated and the vinyl tubing looks really bad.
CBO
A very similar if not exact leaning post is pictured in the Photo Gallaries, Photo Albums>Boston Whaler OEM Parts>Leaning Post. If you look at the metal bracket facing the stern there is white vinyl/rubber tubing protecting the upper bar from the lower bar. It is even with the stern leg of the leaning post. I would take pictures of mine but it's in parts awaiting this tubing.
CBO
Thanks for your reply. It's hard to find hose with a thin wall. This bar is meant to go up and down and all of the hose I found that is greater than 1.25" ID has to thick of a wall and will not fit between the fixed bar and the movable bar.
