1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

whaler decal's measurement
ironjime9	#1  Posted on 03/02/08 - 12:04 PM
Member Posts: 10 Comments: 1 Joined: 10/19/07	Replacing the stern decal's on my 22 fresh painted hull with no reference to really go by, somebody have a correct measurement. thanks.
scrimshaw	#2  Posted on 03/03/08 - 4:29 AM
Member Posts: 437 Comments: 0 Joined: 09/09/07	Year and model would help,so could Sue at Twin Cities Marine.
Bob Younger	#3  Posted on 03/03/08 - 4:40 AM
Member Personal Page Posts: 136 Comments: 2 Joined: 06/22/07	Try Magic Brush, I got mine from them (14" for 1963 Eastport). They are one of our sponsors (see upper right) and will be able to help you.
Derwd24	#4  Posted on 03/03/08 - 8:30 AM
Member Posts: 1607 Comments: 9 Joined: 05/09/07	Are you asking about the decals themselves or where they should be located on the side of the boat? If it's the latter, I've seen some located up high closer to the gunwale, but mine are lower, closer to the middle. I'm not sure if BW had different locations for different years/models? Also noticed on some aftermarket port side decals, the Boston is before the harpoon and on some it's after, so it's probably best to stick with original decals... Edited by Derwd24 on 03/03/08 - 8:51 AM
DelawareDan	#5  Posted on 03/04/08 - 4:32 AM
Member Personal Page Posts: 328 Comments: 2 Joined: 05/24/07	[IMG]http://i204.photobucket.com/albums/bb77/DelawareDan/whaler%20project/DSCN0361.jpg[/IMG] [IMG]http://i204.photobucket.com/albums/bb77/DelawareDan/whaler%20project/DSCN0359.jpg[/IMG] I don't have your model, but I thought I'd post this here "for future generations." I believe my stickers were original to my '69 Montauk-sized Whaler. It was the original gelcoat, and the sticker certainly looks nearly 40 years old. I took the pictures so that when I'm done with the hull, I can place the stickers where they were.
ironjime9	#6  Posted on 03/04/08 - 4:36 PM
Member Posts: 10 Comments: 1 Joined: 10/19/07	Delaware Dan Thanks very much. that will help a great deal in rebuilding my 1979 22' outrage. Jim
Yiger	#7  Posted on 03/04/08 - 7:33 PM
Member Personal Page Posts: 122 Comments: 1 Joined: 12/03/07	Has anyone found a place to get the new 'drip mold' logos, rather than the old sticker style? Are these even obtainable?
bdingman	#8  Posted on 03/05/08 - 8:53 AM
Member Personal Page Posts: 9 Comments: 0 Joined: 12/06/06	When I refinished the hull of my 1984 Montauk, I bought all new decals from MagicBrush. I sent Janis Johnson at Magic Brush the HIN # and she was able to determine the exact size and all the decals that were on my original boat. She also made new Hull registration numbers that matched the BW block letter style and color. As far as where to locate the BW decals, I contacted Chuck Bennett at Boston Whaler, 386-428-0057 cbennett@whaler.com and he gave me the location dimensions for all the decals I needed.
Jeff	#9  Posted on 03/05/08 - 6:27 PM
Member Posts: 1987 Comments: 34 Joined: 04/02/05	I know I have measurements for the placement of the logos on 22' Outrage Hull. I think I also have some red and black whaler logos left over from my old 22. Let me look at my office tomorrow. Edited by Jeff on 03/05/08 - 6:28 PM 1993 23' Walkaround Whaler Drive