|
Front console seat for Eastport/Nauset
|
| Fitzgp |
Posted on 01/27/08 - 10:40 AM
|
Member
Personal Page
Posts: 33
Comments:
2
Joined: 08/09/07
|
Hi All,
I've just finished the pilot seat and rear seat for my 1968 Eastport and am starting on the console. My boat never had the forward console jump seat and I'd like to fabricate one.
Does anyone have drawings/plans for the forward console jump seat on the classic Nausets or Eastports?
The console plans that I have been able to get make mention to the seat, but there are no drawings or dimensions. I believe that it calls out for the seat to be built and installed separately. I can probably figure it out based on scale of the console but thought I would check with site members.
Any information would be appreciated.
Regards
|
| |
|
|
| jollyrog305 |
Posted on 01/27/08 - 12:26 PM
|
Member
Personal Page
Posts: 200
Comments:
0
Joined: 01/15/08
|
BW used to have a link on their web site that had all the wood spec, but I can no longer find it (even looked thru some of the archives). Maybe contact these guys - Cedar Lake Manufacturing - http://www.geocities.com/m_breuer/. Their web site shows some beautiful work
|
| |
|
|
| kamie |
Posted on 01/27/08 - 12:51 PM
|
Member
Personal Page
Project Albums
Posts: 2975
Comments:
3
Joined: 11/04/05
|
If you download the console plans from WC the first page shows the forward jump seat. It should give you an idea of what you need to make.
|
| |
|
|
| SouthShoreWhaler |
Posted on 01/27/08 - 1:30 PM
|
Member
Posts: 14
Comments:
0
Joined: 12/15/07
|
i just took the console out of my 66, here is a link to what it looks like
http://good-times.webshots.com/photo/2802279240099108163sWPgPE?vhost=good-times
if this is what you are looking for i can get some more pics and measurments if needed.
also somewhere on whalercentral you can download plans for the console construction
Edited by SouthShoreWhaler on 01/27/08 - 1:31 PM |
| |
|
|
| Fitzgp |
Posted on 01/27/08 - 4:07 PM
|
Member
Personal Page
Posts: 33
Comments:
2
Joined: 08/09/07
|
Thanks to everyone for the responses.
Kamie, that's probably the way I'll go. I have the console plans from the site and am building one now. The jump seat shouldn't be too hard to "guesstimate".
Southshore Whaler, that's it all right. Good luck in your restoration.
JollyRog 305, Cedar Lakes is a good website and I sent out a request for plans as well as a price on a windshield.
Thanks for all the help and I'll post some photos of my progress soon.
|
| |
|
|
| danedg |
Posted on 01/28/08 - 6:33 PM
|
Member
Personal Page
Posts: 349
Comments:
6
Joined: 01/24/06
|
I'll be happy to supply all dimensions or product as necessary
danedg attached the following image:
[50.66Kb]
|
| |
|
|
| Fitzgp |
Posted on 01/29/08 - 3:15 PM
|
Member
Personal Page
Posts: 33
Comments:
2
Joined: 08/09/07
|
Danedg,
This is perfect and just what I needed! Thanks for all the help.
|
| |
|
