1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

bimini top for Nauset
TOM OHARA	#1  Posted on 01/20/08 - 7:04 PM
Member Posts: 6 Comments: 0 Joined: 12/16/07	Can anyone give me the dimensions of a bimini top for a Nauset. especially the height Thanks tom
kamie	#2  Posted on 01/21/08 - 6:14 AM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	Call Mills and ask Suzanne, she should be able to tell you or she can get the height. Assuming you were talking about a Mills Sun Top of course. Edited by kamie on 01/21/08 - 6:15 AM
Jeff	#3  Posted on 01/21/08 - 6:16 AM
Member Posts: 1987 Comments: 34 Joined: 04/02/05	Are you looking for this info for shipping? 1993 23' Walkaround Whaler Drive
malabarkeel	#4  Posted on 01/21/08 - 8:07 AM
Member Personal Page Posts: 12 Comments: 1 Joined: 04/21/07	It would be also nice to know this info as installed on the boat. I'd like to eventually install one on my Sakonnet but wonder if at six foot four I can stand under it without stooping.
MW	#5  Posted on 01/21/08 - 11:40 AM
Member Personal Page Posts: 1827 Comments: 10 Joined: 01/08/06	A canvass maker can bend one up to any hight you wish, no problem. mw
Joe Kriz	#6  Posted on 01/21/08 - 12:05 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Tom, If you do buy one or have one made up especially for your height, I would recommend that you mount it like the newer Classic models. These mount on top of the gunwales with sliders so the top is basically outside the side and bow rails when up or stowed. Don't know if you have the bow rail or not. Take a look at these photos: http://users.sisqtel.net/blewis/Monta...ntauk.html
danedg	#7  Posted on 01/24/08 - 7:41 PM
Member Personal Page Posts: 349 Comments: 6 Joined: 01/24/06	GMI Top Design in Canada makes a fine product...reasonably priced... danedg attached the following image: [84.44Kb]