1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

13 sport footman loops for battery and gas tie down?
BobHalfMoon	#1  Posted on 06/28/24 - 5:24 AM
Member Posts: 10 Comments: 0 Joined: 05/01/23	I can't seem to find these anywhere. The ones on my boat measure 2.125" hole to hole. I seem to be able to find anything but this size. I just bought this 2000 13 sport and someone replaced some of the loops with regular steel ones and they are rusted so I would like to replace them all. Does anyone know where to get replacements?
Phil T	#2  Posted on 06/30/24 - 6:24 PM
Administrator Personal Page Personal Album Project Albums Posts: 7044 Comments: 6 Joined: 03/26/05	Check this list. https://www.mcmaster.com/products/foo...9;s-loops/ 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
BobHalfMoon	#3  Posted on 07/04/24 - 3:26 AM
Member Posts: 10 Comments: 0 Joined: 05/01/23	Phil T wrote: Check this list. https://www.mcmaster.com/products/foo...9;s-loops/ Thank you, checked it out to no avail. I think I will just remove the ones I have and see if I can de-rust them, and polish them up. Hopefully under all that there is actually stainless steel!
PhilD	#4  Posted on 07/09/24 - 1:11 PM
Member Posts: 48 Comments: 0 Joined: 06/15/23	I'm taking my 13 out tomorrow. It's a 2023 but I'll check the measurements and bolt spacing and let you know.
BobHalfMoon	#5  Posted on 07/09/24 - 2:12 PM
Member Posts: 10 Comments: 0 Joined: 05/01/23	PhilD wrote: I'm taking my 13 out tomorrow. It's a 2023 but I'll check the measurements and bolt spacing and let you know. I measured 2.25 hole spacing. So I know the spacing, just can't seem to find them available with that spacing. Is this something Boston Whaler might sell?
PhilD	#6  Posted on 07/09/24 - 2:37 PM
Member Posts: 48 Comments: 0 Joined: 06/15/23	BobHalfMoon wrote: PhilD wrote: I'm taking my 13 out tomorrow. It's a 2023 but I'll check the measurements and bolt spacing and let you know. I measured 2.25 hole spacing. So I know the spacing, just can't seem to find them available with that spacing. Is this something Boston Whaler might sell? Hi Bob, that's what I was thinking. If it matches up to a recent part, they will most likely have it or be able to order it. I'm thinking about ordering a couple myself so I can add a second tank. I will keep you posted.
BobHalfMoon	#7  Posted on 07/09/24 - 4:45 PM
Member Posts: 10 Comments: 0 Joined: 05/01/23	Thank you :)
MG56	#8  Posted on 07/19/24 - 6:59 AM
Member Personal Page Posts: 357 Comments: 0 Joined: 05/11/13	I have a new strap and the spacing is 2.25. They are black plastic if you are interested. Camco replacement strap 55364
PhilD	#9  Posted on 07/19/24 - 1:06 PM
Member Posts: 48 Comments: 0 Joined: 06/15/23	Sorry Bob, I've taken out the 13 almost every day this week and I keep forgetting to bring the tape measure! On the newer 130 Super Sports, the battery uses those loops but the gas tank uses a different kind of strap Here's all the part numbers https://www.nausetmarine.com/wp/wp-content/uploads/nausetmarine.com/2021/08/Binder1.pdf
Joe Kriz	#10  Posted on 07/19/24 - 4:57 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	BobHalfMoon wrote: I can't seem to find these anywhere. The ones on my boat measure 2.125" hole to hole. I have several in my parts bin that I have taken out in the past. Not sure what Whalers. Several of them are 2 7/8" center to center. (2.875") I don't see those even on any lists. However, the list that Phil gave you shows several that have your dimensions of 2.125" = 2 1/8" Please explain a little more? Joe Kriz attached the following image: [139.54Kb]
MG56	#11  Posted on 07/20/24 - 3:01 AM
Member Personal Page Posts: 357 Comments: 0 Joined: 05/11/13	Joe Kriz wrote: I have several in my parts bin that I have taken out in the past. Not sure what Whalers. Several of them are 2 7/8" center to center. (2.875") I don't see those even on any lists. However, the list that Phil gave you shows several that have your dimensions of 2.125" = 2 1/8" Please explain a little more? Joe, he changed the size in post #5 to 2.25"