1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Removal of front back rest cushions
Rmaurer	#1  Posted on 06/21/24 - 8:08 AM
Member Posts: 2 Comments: 0 Joined: 06/20/24	I have a 2011 220 outage . I want to replace the worn out back cushion above the cooler and the cushion on the bow behind the anchor. Does anyone know how to remove these cushions.
Phil T	#2  Posted on 06/21/24 - 5:25 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Boston Whaler cushions are attached via 3 methods: A- via hidden button snaps on the face of the mounting surface and the back of the cushion. B- via a metal clip mounted to the hard surface that has a mating partner on the cushion. C- A machine screw throught the mounting surface into a threaded insert in the back of the cushion. For the cooler backrest, check inside the console, forward wall, for a hex heads of the machine screws. For the bow cushion, peel back the edges and look for button snap. Use a flat headed screwdriver and insert in the middle and twist gently. Phil T attached the following image: [164Kb] 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Rmaurer	#3  Posted on 06/24/24 - 8:06 AM
Member Posts: 2 Comments: 0 Joined: 06/20/24	Thanks for info. There is no hex bolt on the forward console bulk head , so it must be clips or snaps . On the bow cushion I will try the screw driver method . Thanks again.