1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1996 Dauntless 15 Repower
JCDauntless	#1  Posted on 07/09/23 - 11:16 AM
Member Posts: 1 Comments: 0 Joined: 07/07/23	First post so please be kind. Looking at repowering 1996 60 HP Mercury 4 stroke with 2017 50 HP Mercury 4 stroke on my 1996 Dauntless 15. Hear it should be "easy" as bolt patterns and controls can be left in place and just reconnected. Are there Gremlins hiding I should know about? Thanks, JC
Phil T	#2  Posted on 07/10/23 - 8:40 AM
Administrator Personal Page Personal Album Project Albums Posts: 7044 Comments: 6 Joined: 03/26/05	Verify the existing bolt holes in the transom are the standard spacing. Some dealers did not follow a standard hole layout. The top bolt holes should be 1-7/8" down from the top. The lower can be any of the ones indicated in this diagram EXCEPT for the blind holes. http://www.whalercentral.com/articles...icle_id=82 Once you verified the hole spacing, you will want to mount the new engine so the top bolts are in the 3rd hole down from the top and the lower holes in the middle of the slot or middle hole (some Mercury engines dont have lower slots.) Also you will want a quality stainless steel prop. Do not waste your money on a new engine and install an aluminum prop. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT