1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Rod holder caps
renoduckman	#1  Posted on 05/24/23 - 2:43 PM
Member Posts: 81 Comments: 0 Joined: 08/12/05	I have a 1974 Montauk. Trying to locate replacement caps for the rod holders in the RPS? An older thread mentioned white cap S1957L, but I can’t find those now. Thanks
Finnegan	#2  Posted on 05/25/23 - 11:30 AM
Member Posts: 1926 Comments: 16 Joined: 05/02/08	I am the one who originally found these, and you can get them here. https://marineengineparts.com/whiteca...nd-s-7003/ They don't have the built-in flare of the rod holder tops, but still work well. I am using many of them now, and they hold up well and do not yellow out. To install, remove the rod holder from the seatback, slide on as tight as possible, measure the length of the rod holder from the bottom to the top of seatback, and cut the outer shell of the cap to fit above the wood. I used them on this boat. See 1st, 6th and 18th photos. Click on photo then cllick again to enlarge full screen. (this boat sold a few years ago) https://boats-from-usa.com/boston-wha...-21-204314 Edited by Finnegan on 05/25/23 - 11:53 AM
renoduckman	#3  Posted on 06/02/23 - 8:35 PM
Member Posts: 81 Comments: 0 Joined: 08/12/05	Thanks Finnegan, They work well. Good customer service when ordering them also.