1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Montauk 17 Windshield Source Toledo Ohio
MaumeeMontauk	#1  Posted on 12/15/22 - 10:14 AM
Member Posts: 1 Comments: 0 Joined: 12/12/22	My 1990 Montauk 17 is in "Like New" condition. I am very "fussy" about EVERYTHING ! No apologies. Over the years, the 3-sided 'wrap-around' plexiglass "wind-screen" or windshield became "crazed" -- looking straight-on it was clear but at certain sun angles there was the appearance of annoying "crazing" like millions of internal miniscule cracks within the plexiglass. I found two names of suppliers but neither was nearby and shipping this reasonably large and possibly brittle (it wasn't) but I thought I would trace a pattern rather than trying to ship my windshield. I wanted an exact match and I wanted the few mounting holes EXACTLY POSITIONED! Fussy? Yep! It was then that I saw an ad in a Lake Erie oriented boating magazine. I visited the shop listed and I talked to the owner "Jeff Hood". Judging from the article posted on his lobby bulletin board and talking to him--I found an equally fussy boat-owner and capable "manufacturing guy". With the close of the boating season here in NW Ohio, I took my Whaler's windshield to ALLIED PLASTICS, INC. He very promptly completed my "project" --not a big challenge based on the tooling I saw in his shop. I measured and compared every aspect of the new to the old--EXACT DUPLICATE ! That's what this fussy veteran Whaler owner/operator wanted. Here's the info: Jeff Hood -- ALLIED PLASTICS INC.; 3203 South Avenue; Toledo, OH, 43609 ; 419-389-1688 or his cell 419-810-4681 or (removed email as NO email addresses are allowed here) Toledo (and Allied) -- very accessible (For fussy people like me) Ohio Turnpike and I-75 in NW Ohio. This is an excellent supplier for the "Discerning Whaler Owner" (sounds better than "fussy"). Edited by Joe Kriz on 12/15/22 - 6:51 PM
Phil T	#2  Posted on 12/15/22 - 12:15 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	It would be helpful to see photos of the finished project installed. Maybe even a before and after. For those interested, what is the out the door price for this sized windshield? 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
wannabe	#3  Posted on 12/15/22 - 5:15 PM
Member Posts: 287 Comments: 1 Joined: 06/03/09	Jeff Hood(Allied Plastics) made my bridge windshield for my Chris Craft Commander and it was perfect with a good pattern. I need to get my lazy butt out to the barn and get my 18 Outrage windshield to him because it is crazed. Edited by wannabe on 12/16/22 - 5:41 AM Drew 1988 Outrage 18 - 1988 Yamaha 130 hp