1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

thru hull fitting replacement on 1987 Montauk 17
bsciance	#1  Posted on 09/28/21 - 8:27 AM
Member Personal Page Posts: 15 Comments: 0 Joined: 09/15/20	I'd like to replace the brass thru hull tubing along the transom on our 1987 montauk 17. I've found helpful resources on this issue and have tracked down the tools and parts required. Both from McMaster-Carr: Brass tubing part# 8950K791 and EPDM o-ring part# 9557K482 (dash number 213). The existing brass tubing is brittle, cracked, and some of the flanges have broken off and are missing leaving the inner part of the brass tubing within the thru hull fitting. See photo on my personal page. Do you think it is worth trying to chisel out the old tubing, or replace the tubing with a more narrow OD, such as 3/4"? Has anyone else dealt with this? Edited by bsciance on 09/28/21 - 8:40 AM
Phil T	#2  Posted on 09/28/21 - 9:38 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	You need to "turn on" your personal page. From your post, you need to replace the entire tube and O rings. Do not reduce the tubing, remove the entire tube and replace with 1". You will need a flaring tool as well. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
bsciance	#3  Posted on 09/30/21 - 7:55 AM
Member Personal Page Posts: 15 Comments: 0 Joined: 09/15/20	Thanks for the reply Phil. I figured replacing it entirely would be the best choice, will just take my time chiseling out the old brittle brass tubing. My personal page is set to ONLINE, maybe it's still in the review and approval process by admins?
reelescape1	#4  Posted on 10/01/21 - 10:15 AM
Member Personal Page Posts: 68 Comments: 0 Joined: 11/12/05	I have a whole bag of the o-rings and will send you some if you want. E-mail is best and in page here. McMaster-Carr has them and the tubing. I changed mine (1988) 2 years ago.
Phil T	#5  Posted on 10/01/21 - 10:50 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Reel - I'll take 15 if you have that many. Will email you. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
bsciance	#6  Posted on 10/04/21 - 6:22 AM
Member Personal Page Posts: 15 Comments: 0 Joined: 09/15/20	Reel - just emailed you. Thanks for the offer.