1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Prop for E-tec 90 on 16' Whaler
Brooke Lea	#1  Posted on 07/11/21 - 10:33 AM
Member Posts: 20 Comments: 0 Joined: 07/20/13	I've got a 2013 90 hp E-tec on my 1974 16' Katama. I need to replace the prop, and I would appreciate any advice from members who have some experience with this motor-hull combination. Many thanks.
Phil T	#2  Posted on 07/11/21 - 10:38 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Dozens of owners of 16' hulls with an E-TEC 90 have tested props. Their recommendations include: 13-7/8" x 17” BRP Viper 13-1/4" x 19” SST 13-1/4" x 17” Turbo 1 Note size only applies to the specific make/model listed. Engine should be mounted at least 2 holes up, with top engine bolt having 2 empty holes above it. Expect a WOT of 43-44 mph at 5400 rpm's running light, no gear and solo. When these results are reached, the engine will be set to run efficiently and well at any speed with people and gear. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Brooke Lea	#3  Posted on 07/11/21 - 6:35 PM
Member Posts: 20 Comments: 0 Joined: 07/20/13	Thanks! Very helpful. Best, Brooke