1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Engine Mount Advice
Billy B	#1  Posted on 07/22/20 - 8:52 AM
Member Posts: 20 Comments: 0 Joined: 08/06/17	Need suggestions for mounting Yamaha 90 HP Two-Stroke (20" shaft) on 1978 Montauk. Based on the available holes in transom I have the following options for mounting. 1. Mount using top hole (all the way down) and the "blind hole". 2. Mount using two holes up (third hole from the top) and use the "slot".
Phil T	#2  Posted on 07/22/20 - 8:55 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	#2, no question. Recommended props for this model and engine include: 13" x 17" Yamaha Painted Stainless Steel 13-1/4" x 16" Yamaha Performance Series Three Blade 13-1/4" x 15" Turbo 1 4.25 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
biggiefl	#3  Posted on 07/22/20 - 11:10 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	Ditto. Mine had the 17" painted and was a very good match. 24 Whalers so far....
acassidy	#4  Posted on 07/24/20 - 8:56 AM
Member Personal Page Posts: 268 Comments: 1 Joined: 11/21/05	option 2 unless you want your outboard in the boat with you