1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Prop for 18' Outrage
bcoastal	#1  Posted on 05/15/20 - 8:41 PM
Member Posts: 291 Comments: 0 Joined: 08/15/12	18' 1987 outrage with 2010 150 Evinrude. What size prop should I get? Edited by Phil T on 05/16/20 - 9:17 AM
Phil T	#2  Posted on 05/16/20 - 7:03 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Here are the top 3 owner tested and recommended choices for the E-TEC 150 (G1) and the 198x Outrage 18: 14-1/4” x 18” Mercury Enertia /Quicksilver Q3 (+3 holes) SST 14-3/4" x 19" (#176617) Viper 14-3/4" x 19" (#176627) 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
JRP	#3  Posted on 05/16/20 - 8:22 AM
Member Posts: 755 Comments: 2 Joined: 08/29/14	With a 1992 Yamaha V-6 150Hp 2-stroke, I am running a 4-blade Mercury Marine Offshore Series stainless prop, model #48-825898A46 17P (14.5” x 17P). I believe this model has been superseded. (This is on a 1992 19 Outrage II, which is the same hull as the Outrage 18, although spec weight is heavier.) Edited by JRP on 05/16/20 - 8:25 AM 19 Outrage II (1992)
biggiefl	#4  Posted on 05/18/20 - 7:38 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	I have always found that OMC/BRP prefer to run OMC/BRP props. Depends on your budget and bling factor between the SST and Rebel as performance will be very close. 24 Whalers so far....
bcoastal	#5  Posted on 05/18/20 - 5:34 PM
Member Posts: 291 Comments: 0 Joined: 08/15/12	Great. Thank you guys.