Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
From the factory my 60 Bigfoot is mounted "2 holes up" or the middle hole of 5 holes. My cavitation plate when I am in the back looking at it is just barely under the water when running. I am going to get a stainless prop in the 14' pitch --- am now running the std. Black Max alum. in a 15' pitch. Even in a sharp turn there is no "blowing out" on the current prop. My question is has anyone with my set-up raised there motor to "3 holes up" OR did my standing in the back of a small boat affect the depth of the plate OR will a stainless prop help raise the stern a quarter to half an inch ?
