1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

13 foot steering arm
rae63066	#1  Posted on 04/02/14 - 1:26 PM
Member Personal Page Posts: 39 Comments: 0 Joined: 07/14/13	i am rigging my 1970 13 foot with a 1978 35 johnson and a push pull steering and the steering arm linkage hits the transon beacuse of the curve of the transom when turning starboard the motor can just get past straight, any sugestions ? thanks
gchuba	#2  Posted on 04/02/14 - 6:21 PM
Member Posts: 1675 Comments: 0 Joined: 03/31/13	Any pictures of the set up? Hard to figure linkage issues without seeing. gchuba
kamie	#3  Posted on 04/02/14 - 7:26 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	You need what is typically called a teleflex standoff bracket. AKA Clamp Block Outboard, or part D http://www.jamestowndistributors.com/...ocId=711#D Your other option is to fashion a tilt tube that sits forward of the existing tilt tube so the steering clears the curve of the tansom http://www.whalercentral.com/infusion...er_id=7367 Edited by kamie on 04/02/14 - 7:31 PM
rfuerst911sc	#4  Posted on 04/03/14 - 3:43 PM
Member Posts: 178 Comments: 0 Joined: 09/25/11	I installed the Teleflex stainless steel standoff it is solid as a rock and works great. They also make a cheaper painted version but I recommend the stainless steel.
rae63066	#5  Posted on 04/03/14 - 4:40 PM
Member Personal Page Posts: 39 Comments: 0 Joined: 07/14/13	kamie that fashion a tilt tube is pretty slick. that is my problem. thank you all