1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

binnacle controls?
tetontrouthunter	#1  Posted on 03/30/14 - 6:03 PM
Member Posts: 12 Comments: 0 Joined: 03/05/14	I have a 1971 16 ft "red dot" bare hull. That has a 1985 50hp mercury with side mounted quicksilver controls. That were mounted on a "bracket" to a plywood console that I have removed. I would like recommendations on "binnacle" controls as I am going to ether build or buy a new console for this hull. I am looking not looking to turn this into a historic model, but rather a fishing machine. the quicksilver control cables I have are in good shape. Edited by Joe Kriz on 03/30/14 - 6:44 PM
hullinthewater	#2  Posted on 03/30/14 - 11:06 PM
Member Personal Page Posts: 124 Comments: 0 Joined: 06/29/13	This guy runs a Marine Salvage on ebayclassifieds; I've bought some items and he came through OK. bgordes@fidnet.com www.ebayclassifieds.com in the Springfield or St. Louis, Missouri.
Phil T	#3  Posted on 03/31/14 - 6:20 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Do you need tilt/trim on the control arm? A classic non-OEM brand that is worth considering is a Teleflex Morse MT-3. They can be adapted for all the major brands of shift/throttle cables. http://www.go2marine.com/item/63366/t...5310p.html
tetontrouthunter	#4  Posted on 03/31/14 - 6:23 PM
Member Posts: 12 Comments: 0 Joined: 03/05/14	I do not need tilt/trim. Just a simple throttle/ shift and I can relocate the push to choke ignition to the console.