1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Installing Fire Extinguisher Pocket?
kamie	#1  Posted on 06/09/07 - 4:44 AM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	When you install the fire extinguisher pocket into the console do you just use the screws to hold it, or should I use 5200 to secure the pocket to the console? thanks
jerrym4	#2  Posted on 06/09/07 - 4:59 AM
Member Posts: 5 Comments: 0 Joined: 10/02/05	O.E.M. installation is with oval headed, threaded screws with washers and nuts. Jerry
Joe Kriz	#3  Posted on 06/09/07 - 7:43 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Kamie, I used clear silicone to seal mine. It comes off easily if you ever have to take the pocket out and it stops water from seeping in especially when washing the boat. jerrym4, I have seen several different screws originally holding in the teak frame through the years. 1. oval head, phillips 2. flush head, phillips
kamie	#4  Posted on 06/09/07 - 3:23 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	Thanks Joe,