View Thread
Before Posting, Please Read Our Posting Guidelines Below.

1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

 Print Thread
Why do we do it
huckelberry145
#1 Print Post
Posted on 02/21/13 - 7:37 AM
Member

Posts: 401
Comments: 3
Joined: 03/10/12

I don't know of many other brands of boat much less anything of collectible or practical value that we put so much time, labor, and well, money into other than a Boston Whaler. I know that even if I could buy a "classic" 15' striper or 19' Outrage decked out with the finest mahogany interior, chromed brass, stainless fixtures and hardware, teak hatches and doors, that they would cost an astronomical amount. I know our friends and neighbors that watch us go through a modification or a restoration wonder why we don't just go down to the local marine dealer and buy a new boat. But we know the difference. That some, or at least the ones in my price range are rigged merely for price point. Pretty much under powered and generically propped, and everything that is chromed is plastic or pot metal. But when we get our whaler completed, and it turns out like new, we know that no amount of money could buy that kind of quality and craftsmanship. If the restoration on my whaler costs as much as a whaler wannabe like so many boat manufacturers have come to be, I'll take the real thing.

 
Marko888
#2 Print Post
Posted on 02/21/13 - 12:24 PM
Member
Project Albums

Posts: 413
Comments: 10
Joined: 05/26/08

My Pop calls it Whaleritis!

 
Weatherly
#3 Print Post
Posted on 02/21/13 - 2:18 PM
Member

Posts: 752
Comments: 4
Joined: 12/31/06

It was a balmy 36 degrees this afternoon so I crawled under the shrinkwrap and removed the console louvre teak doors from my newly acquired 1986 Montauk. The temperature started to drop and the wind picked up, but I decided to begin sanding the teak. My hands started to freeze so I gave up, but not before gaining satisfaction that I am another step closer in my quest to restore this Boston Whaler to like new condition. There is no cure for this obsession other than just working towards perfection!

 
huckelberry145
#4 Print Post
Posted on 02/21/13 - 2:51 PM
Member

Posts: 401
Comments: 3
Joined: 03/10/12

So far, there are 27,179 members on this website, I am not alone in my endeavor. Every time I hear a acquaintance or co-worker mention their brother-in-law or something has a whaler sitting in the back of a field somewhere rotting my heart sinks.

 
CES
#5 Print Post
Posted on 02/21/13 - 3:20 PM
User Avatar
Member
Personal Page
Photo Albums
Project Albums

Posts: 2681
Comments: 7
Joined: 04/27/07

I remember when whaler central had 7,000 members.


Cliff
1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
 
butchdavis
#6 Print Post
Posted on 02/21/13 - 4:26 PM
Member

Posts: 838
Comments: 0
Joined: 11/22/11

Have you heard of OCB? I admit to suffering from BWOCB. I can't help it it's a disorder!


Butch
 
jamesgt727
#7 Print Post
Posted on 02/21/13 - 9:05 PM
User Avatar
Member
Personal Page
Project Albums

Posts: 360
Comments: 0
Joined: 01/17/11

My third Whaler was delivered this morning!

 
SeaLevel
#8 Print Post
Posted on 02/22/13 - 4:13 AM
User Avatar
Member
Personal Page

Posts: 193
Comments: 0
Joined: 05/03/09

I'm 68 years old and have built and restored things my whole life. I know first hand what a drawn out affair it is to rebuild something from the ground up and the satisfaction that comes from searching out every detail and not cutting corners. The end result usually turns into a work of art. Many people today seek instant gratification or lack the time or skills to carry out an involved restoration project.


"It's just a forty eight year old Whaler but it's all mine"
Joseph R Palmieri
 
spuds
#9 Print Post
Posted on 02/22/13 - 1:35 PM
User Avatar
Member
Personal Page

Posts: 166
Comments: 5
Joined: 08/01/07

My Whalers have a place in my heart equal to the same affection that I have for my dogs.
Hence, I have two dogs and two Whalers. Coincidence?


1985 Outrage 18
 
huckelberry145
#10 Print Post
Posted on 02/22/13 - 3:44 PM
Member

Posts: 401
Comments: 3
Joined: 03/10/12

One trend I have definitely noticed with a lot of members on this site is that they like me, want to either keep, restore or replace the boat they had in their childhood or youth. I restored my grandfather's 1979 11' sport just because of all the memories the subsequent generations have and will make in the years to come. Then last year I bought a 15' standard so I could customize it into a striper model, again trying to bring back a piece of my youth.

 
bob camire
#11 Print Post
Posted on 02/26/13 - 2:56 PM
Member

Posts: 255
Comments: 4
Joined: 08/10/12

Nice thread Huck ! My thoughts on why we do it is cuz we know the meaning of quality..safety..timeless workmanship..more value and quality..old fashioned values..to me whaler got it right ..right from the beginning..the founder was simply brilliant..wish i had a whaler project earlier in my life..but our simple, frigal mirrocraft did it all for us on our lake up here in nh..cruising, skiing and fishing..ive summered on the maine coast for decades, and its taken me this long to get on the ocean on our own craft...I live for this boat..at the first crack of mild weather i will be launching..it really does make one wonder ..why are we so in love with our whalers.. nice thread


2006 Dauntless 160, 115 HP Merc 4 Stroke, 2012 Venture Trailer
 
aeriksen
#12 Print Post
Posted on 02/26/13 - 3:05 PM
Member

Posts: 242
Comments: 0
Joined: 07/24/12

I agree, it's about the craftsmanship. I have a 28 year old Outrage hull and after a few thousand dollars and a lot of elbow grease it's a great boat. there aren't too many hulls you can say that about. Plus the fact that my 18' hull rides as good as many 20' hulls. The design is timeless and it always turns heads where ever you go. It's a beautiful Hull!

 
wannabe
#13 Print Post
Posted on 02/26/13 - 4:42 PM
Member

Posts: 287
Comments: 1
Joined: 06/03/09

aeriksen wrote:
I agree, it's about the craftsmanship. I have a 28 year old Outrage hull and after a few thousand dollars and a lot of elbow grease it's a great boat. there aren't too many hulls you can say that about. Plus the fact that my 18" hull rides as good as many 20' hulls. The design is timeless and it always turns heads where ever you go. It's a beautiful Hull!

My Outrage 18 is 25 years old and I could not have wrote it any better myself.


Drew
1988 Outrage 18 - 1988 Yamaha 130 hp
 
wannabe
#14 Print Post
Posted on 02/26/13 - 4:44 PM
Member

Posts: 287
Comments: 1
Joined: 06/03/09

bob camire wrote:
Nice thread Huck ! My thoughts on why we do it is cuz we know the meaning of quality..safety..timeless workmanship..more value and quality..old fashioned values..to me whaler got it right ..right from the beginning..the founder was simply brilliant..wish i had a whaler project earlier in my life..but our simple, frigal mirrocraft did it all for us on our lake up here in nh..cruising, skiing and fishing..ive summered on the maine coast for decades, and its taken me this long to get on the ocean on our own craft...I live for this boat..at the first crack of mild weather i will be launching..it really does make one wonder ..why are we so in love with our whalers.. nice thread

X2 I have spring fever real bad . Just this week I got a Lowrance gps/chartplotter and ordered replacement decals for my Outboard for the much needed spring repaint. I have most of the wood off the interior and stripped of varnish. I only have to order my new rub rail when my wallet recovers.


Edited by wannabe on 02/26/13 - 4:55 PM
Drew
1988 Outrage 18 - 1988 Yamaha 130 hp
 
huckelberry145
#15 Print Post
Posted on 02/26/13 - 7:20 PM
Member

Posts: 401
Comments: 3
Joined: 03/10/12

I could only imagine what it's like to be in those northern latitudes. Poor ol weatherly is having to work between knuckle freezing days when it is a cool 65 here. Because of that, I'm almost done with my custom striper, but I will also have to wait for the savings account to recover before I get motor decals.

 
EJO
#16 Print Post
Posted on 02/28/13 - 10:00 AM
User Avatar
Member
Personal Page

Posts: 669
Comments: 6
Joined: 11/25/12

huckelberry145 wrote:
I could only imagine what it's like to be in those northern latitudes. Poor ol weatherly is having to work between knuckle freezing days when it is a cool 65 here.


yea we like to "boat" year around but when the water is "hard" and you can't apply paint or even strip varnish because it is freezing(been there done that) all we can do is read these threads and wish for spring to start early.


Skipper E-J
m/v "Clumsy Cleat" a 2008 Montauk 150
 
wannabe
#17 Print Post
Posted on 02/28/13 - 5:59 PM
Member

Posts: 287
Comments: 1
Joined: 06/03/09

EJO wrote:
huckelberry145 wrote:
I could only imagine what it's like to be in those northern latitudes. Poor ol weatherly is having to work between knuckle freezing days when it is a cool 65 here.


yea we like to "boat" year around but when the water is "hard" and you can't apply paint or even strip varnish because it is freezing(been there done that) all we can do is read these threads and wish for spring to start early.


I took my wood trim off the boat and am working on it in the basement.


Drew
1988 Outrage 18 - 1988 Yamaha 130 hp
 
ritzyrags
#18 Print Post
Posted on 02/28/13 - 8:42 PM
User Avatar
Member
Project Albums

Posts: 1003
Comments: 36
Joined: 06/18/08

Got to be careful when re fitting your Whaler..
You could like I have, try to recapture the original "brand new" shape and in this quest spend way too much time and money doing it.
The refit will never be quite and totally done.There always will be some obscure details to be addressed.The payback will dwell in the fact that the more you will look at the boat ,the better the boat will look.
And in the end will be a monument to your good taste and of your artistic expressions.



Dont lie
Dont Cheat
And dont give up..
 
wannabe
#19 Print Post
Posted on 03/01/13 - 4:47 AM
Member

Posts: 287
Comments: 1
Joined: 06/03/09

Ritzy, you are so correct. After I got the gelcoat looking good the wood looked bad. After the wood is done the faded outboard needs painted and then the stained rubrail will look bad. I guess that is the fun of it within reason while not trying to make it look brand new.


Drew
1988 Outrage 18 - 1988 Yamaha 130 hp
 
huckelberry145
#20 Print Post
Posted on 03/01/13 - 7:15 AM
Member

Posts: 401
Comments: 3
Joined: 03/10/12

Exactly ritzy and wannabe, and also don't make a museum piece, unless you are trying to do so. I want a boat that looks good and that i can catch bait off the bow of and not cringe every time a net full of mud and oyster shells hit the deck.

 
Jump to Forum:
Bookmark and Share
Today's Date & Time
November 24, 2024 - 7:46 PM
Visit our Sponsors
Nauset Marine - Whaler Parts and Accessories


Carver Covers - The Best Covers Under The Sun


Wm. J. Mills and Co. - Boston Whaler Canvas


Specialty Marine - Parts and Accessories



Click on logo to visit site
View all Sponsors Here
Users Online
Welcome
AuntiesMontauk
as the newest member

· Guests Online: 6
· Members Online: 0
· Total Members: 50,390
Login
Username

Password

Remember Me


Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Top 5 Models Posted
· Montauk 17 1,638
· Sport 13 1,366
· Outrage 18 556
· Nauset 16 402
· Sport 15 365

View all Models Here
Render time: 0.19 seconds Copyright WhalerCentral.com © 2003-2024 86,555,213 unique visits