1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

How long control cables for 16' Nauset
sunnybreeze	#1  Posted on 01/31/13 - 4:01 AM
Member Personal Page Posts: 28 Comments: 0 Joined: 12/09/12	I have been getting nothing but great advise on my 16' nauset rebuild. I have decided to repower with a 2012 Yamaha F70 4 stroke. How long do I tell the dealer to order the Control cables and wiring harness? Running a standard console in the normal factory position. Thanks Steve in maine
Finnegan	#2  Posted on 01/31/13 - 10:19 AM
Member Posts: 1926 Comments: 16 Joined: 05/02/08	Cables should be 18' under most circumstances. The ignition harness will problably come in 5' increments, so 20' would be correct. See this recent discussion on the subject; http://www.whalercentral.com/forum/vi...d_id=16527
WRufus	#3  Posted on 04/29/13 - 6:34 PM
Member Personal Page Posts: 73 Comments: 1 Joined: 01/15/13	I was wondering the exact same question for my f70 that is going on the 1989 montauk. I have to rig it up and from the link above on the subject and from other research i have done it seems like people are recommending 15 or 16 ft cables. i guess i am wondering if yamaha cables come in 5' increments. I would like the cables to be set up right, but i also want the minimum amt of extra cables. I was the pics of toby port's montauk with f70 (fellow member) but i cant find the thread. His rigging on his boat looked perfect. Edited by Joe Kriz on 04/29/13 - 6:36 PM 1989 Montauk 17' w/ F70 Yamaha