Pull OR rocker on/off switch?
|
Etops73 |
Posted on 08/29/12 - 10:16 AM
|
Member
Personal Page
Posts: 68
Comments:
2
Joined: 07/13/07
|
I'm re-wiring my console and will be buying new switches. I only need 3 of them for now (bilge, nav/anchor light, and deck lights). Should I use 3 position pull switches OR rocker switches.
Thanks
|
|
|
|
Phil T |
Posted on 08/29/12 - 10:30 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7039
Comments:
6
Joined: 03/26/05
|
Bilge is a 3 position (auto, off, on)
Navigation lights is also 3 position (running, off, anchor)
Deck lights is a 2 position.
Push/pull switches (i.e. cole-hersey) are easier to install with less cutting of the panel.
I used Blue Sea's 4 bank rocker switches with fuses and a separate bilge switch. See my personal page.
|
|
|
|
Etops73 |
Posted on 08/29/12 - 10:57 AM
|
Member
Personal Page
Posts: 68
Comments:
2
Joined: 07/13/07
|
Thanks Phil T. That's exactly the comparison I'm looking for. Just wondering if the 3 position pull switch will be in my way when fully extended in "on" position.
|
|
|
|
Phil T |
Posted on 08/29/12 - 12:50 PM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7039
Comments:
6
Joined: 03/26/05
|
I recall the original instrument panel came with two push/pull switches. One of the two on the Outrage was a 3 way for the console mounted anchor light.
|
|
|
|
Joe Kriz |
Posted on 08/29/12 - 1:06 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
All Classic Outrage and Montauks had the Pull Switches.
Here is a panel on an Outrage model.
http://www.whalercentral.com/photogal...hoto_id=85
Here is another photo. The Nav Light is 3 position. The compass is only on/off
http://www.whalercentral.com/images/j...panels.jpg
Around 1996 they changed to the rocker switches.
I am still trying to determine which models had the changeover to rocker switches first and what year(s) for the different models.
We have one member stating he has a 3 way toggle switch that was original to his 1995 Dauntless 13'
http://www.whalercentral.com/forum/vi...;pid=99070
And in the same post above, a member with a 2000 Montauk 17' says he has the same toggle switch.
http://i61.photobucket.com/albums/h51...Wiring.jpg
I have never seen that toggle switch on a Montauk before so apparently I wasn't paying attention or that isn't the original switch.
I cannot find any photos in the members personal pages that shows such a toggle switch.
Anyone have anymore information on this?
|
|
|
|
jvz |
Posted on 11/03/12 - 3:35 PM
|
Member
Personal Page
Posts: 215
Comments:
10
Joined: 03/16/07
|
I too am in the process of a re-wire. I am replacing the switches on the panel -
The original 3 position Nav & Anchor has 4 terminals.
The only 3 position Cole-Hersee i can find is a 3 terminal.
Will this work?
I have one white wire coming into the 4th terminal.
|
|
|
|
jvz |
Posted on 11/03/12 - 3:42 PM
|
Member
Personal Page
Posts: 215
Comments:
10
Joined: 03/16/07
|
Got it - when in doubt use an ohm meter.
|
|
|
|
jvz |
Posted on 11/03/12 - 4:22 PM
|
Member
Personal Page
Posts: 215
Comments:
10
Joined: 03/16/07
|
Figured out the wiring, I bought the wrong switch -
Should be the Cole - Hersee M-532 Push pull switch, 3-circuit
|
|
|