1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Fire extinguisher fitment
Marko888	#1  Posted on 08/18/12 - 1:43 PM
Member Project Albums Posts: 413 Comments: 10 Joined: 05/26/08	Is anyone aware of a present day fire extinguisher that will fit the circa 1985 bracket, PB275? I'd like to find one that fits to avoid drilling more holes in my teak extinguisher box. Thank you Edited by Marko888 on 08/18/12 - 3:36 PM
Gmondun	#2  Posted on 08/18/12 - 4:52 PM
Member Personal Page Posts: 161 Comments: 2 Joined: 09/12/11	I'm not sure, but apparently SSI Custom Plastics made the original fire extinguisher pockets for the whalers. I bet if you contact them they'll have an idea of what fire extinguisher you need or at least the dimensions. http://www.ssicustomplastics.com/fire...ishers.htm Edited by Gmondun on 08/18/12 - 4:55 PM
Joe Kriz	#3  Posted on 08/18/12 - 5:05 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	I don't know of any that will fit the original bracket. The American LaFrance was original but no longer available. I also have another brand that will fit but it is no longer available.
Marko888	#4  Posted on 08/20/12 - 6:24 PM
Member Project Albums Posts: 413 Comments: 10 Joined: 05/26/08	Thanks Joe. Sounds like I'll be drilling a couple more holes. bummer.
kamie	#5  Posted on 08/20/12 - 7:07 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	You can always drill the new holes, and then drill out and fit teak plugs into the old ones.