1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Trim Tabs on Montauk 1987
firstpawn	#1  Posted on 05/10/07 - 7:16 PM
Member Posts: 7 Comments: 0 Joined: 04/03/07	Does anyone have experience with installing trim tabs on a classic Montauk? Any suggestions? Bringing a little life to an old Rescue boat. Eric Marco Island, FL
danedg	#2  Posted on 05/11/07 - 5:46 AM
Member Personal Page Posts: 349 Comments: 6 Joined: 01/24/06	Adding a set of "fins" to my outboard made a dramatic improvement to my 17's performance....
jaemrich	#3  Posted on 05/11/07 - 8:06 AM
Member Personal Page Posts: 61 Comments: 1 Joined: 04/02/07	danedg wrote: Adding a set of "fins" to my outboard made a dramatic improvement to my 17's performance.... What did the fins correct? Just got my '79 montauk w/'84 evinrude 90hp a month ago and i notice she wants to list starboard when planed out and that she turns flat like a skiff at higher speeds. would fins help level her out going straight and dig in a little when turning? thanks JE
firstpawn	#4  Posted on 05/11/07 - 6:28 PM
Member Posts: 7 Comments: 0 Joined: 04/03/07	danedg wrote: Adding a set of "fins" to my outboard made a dramatic improvement to my 17's performance.... danedg What brand, size did you use? Electric / Hydrolic? How far from outer edge or from centerline? Lastly, did you incur any problems or special needs on install? FirstPawn Eric
firstpawn	#5  Posted on 05/11/07 - 6:32 PM
Member Posts: 7 Comments: 0 Joined: 04/03/07	jaemrich, The tabs should help correct the listing issue, and if large enough would/should help stabilize in the turns. I will post here after I get info for an update after my install and "someday" after the seatrial. Nice setup you have. Enjoy Eric
Joe Kriz	#6  Posted on 05/11/07 - 7:01 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	I wouldn't consider putting tabs on such a small boat. Maybe a 22' or 25' ocean going Whaler... I think you should start looking first at the height of your motor and the distribution of weight in your boat. Get the motor height set right first and then experiment with different props. I tried a Hydra-fin (or something) on my Montauk... Took it off immediately as it reduced overall performance. Fins are the last result if nothing else works and way too many people have their Montauk setup correctly without the need for a fin... It kind of makes me scratch my head when someone, especially a mechanic, automatically recommends us to put on a fin... If engines needed fins, the engine manufacturers would put one on so they could make more money too. Try anything and everything else first.... especially the engine height....
firstpawn	#7  Posted on 05/11/07 - 7:47 PM
Member Posts: 7 Comments: 0 Joined: 04/03/07	Thanks Joe, I had heard that tabs helped on small boats when trolling and helping with the roll factor. Living in SW FL. and EVERYONE loves to come over and go catching. I can see my "new friends" getting in line when this one gets to get wet. I have gone a bit overboard with this project, but very trick. Hydrolic Jackplate & steering, baitwell, rod holders, outriggers, WOOD, WOOD, WOOD, interior lighting (red/white), keel guard for those special areas, over the top electronics and when all is said and done - full wrap to make it MINE! I mean a functional fishing & Family boat. Not to dismiss your reply, but If you were to suggest tabs, what size, etc. etc. Eric
Joe Kriz	#8  Posted on 05/11/07 - 8:00 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Eric, No, I sure don't have any idea. My Montauk was stable on the turns but my engine was mounted on the low side. It sounds like you have all of the rest of the bases covered. With that jackplate, you can raise or lower your engine with a flip of a switch. Great for the flats and then when back into deeper water. I remember seeing only one Montauk in the past that has had a set of tabs on it and didn't pay any attention to what size or brand.