1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1983 outrage bimini top measurments
dtpac	#1  Posted on 04/10/12 - 3:07 PM
Member Personal Page Posts: 18 Comments: 0 Joined: 04/16/11	Looking to have a bimini top made for my whaler, Mills Canvas is 1240 plus shipping. Not sure if I need that much of a top. Does anyone have the top measurements for the stainless bimini type. My whaler has the rail mounts on slides that are just forward of the console.? When not in use you can push it forward towards the bow out of the way? Thanks for any help.
artodea	#2  Posted on 04/11/12 - 5:18 PM
Member Personal Page Posts: 28 Comments: 0 Joined: 08/25/10	dtpac wrote: Looking to have a bimini top made for my whaler, Mills Canvas is 1240 plus shipping. Not sure if I need that much of a top. Does anyone have the top measurements for the stainless bimini type. My whaler has the rail mounts on slides that are just forward of the console.? When not in use you can push it forward towards the bow out of the way? Thanks for any help. There are three sections in the frame of the Mills sun top (bimini): one about 80" long; the second about 65" long; and the third about 35" long. Each section bends at the top with an approximately 16" radius at a width that just fits on the coming on the bow when stowed. When opened, the hinge is snapped into the aft position on the slider and it slides forward to stow. I can get more precise measurements once I pull mine out of winter storage. Also, I have the sun top canvas in pacific blue you can have for the cost of shipping. There is a small hole that can easily be patched or you can use it as a pattern for your frame and new canvas. - Art Edited by artodea on 04/11/12 - 5:21 PM 1986 Outrage 18 with a 2008 Evinrude 115 e-tec
Joe Kriz	#3  Posted on 04/11/12 - 5:22 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	dtpac, Your personal page shows you already have a Sun Top.... Don't you have the measurements from that top?
dtpac	#4  Posted on 04/11/12 - 7:53 PM
Member Personal Page Posts: 18 Comments: 0 Joined: 04/16/11	Joe, I do have a top but the frame seems to be the problem. The top is not big enough. it seems the frame should be longer to fit in the slide?
dtpac	#5  Posted on 04/11/12 - 8:04 PM
Member Personal Page Posts: 18 Comments: 0 Joined: 04/16/11	Art, Thanks that helps me alot! I looked at your photos and that seems more of a fit then the top I have. The one on my boat seems in the way when not in use, the way it stores on the bow is what I am looking for. Thanks Again