1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

axle replacement
rivereagle	#1  Posted on 04/09/12 - 10:12 AM
Member Posts: 3 Comments: 0 Joined: 02/10/11	The axle on my 2005 Super Sport 13 trailer is rusted through and needs to be relaced. It is a straight galvanized axle with slipper springs. I notice the new Sport 13 trailer comes with a torsion axle. Does anyone have any experience replacing a straight axle with a torsion axle? If so, what is a good source for a torsion axle that will stand up to salt water.
contender250	#2  Posted on 04/09/12 - 12:43 PM
Member Posts: 363 Comments: 0 Joined: 10/09/11	I would just stay with the same type of axle, this way it will match all of the hardware on the trailer for the connection. Now you need to purchase a solid gal. axle and new bearings, After the install coat the axle with LPS #3, this puts a coat of grease like substance on the axle, and I would coat the springs, nuts and bolts as well. I have a 1975 Horizon Trailer, when I purchased the trailer the 1st thing I did was coat the trailer with this stuff, I still have the same axle and only change the springs once....
CES	#3  Posted on 04/09/12 - 1:23 PM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	X2 Contenders statement.... I'd stay with the same type axle or buy a whole new trailer all together. I coated my axle with........spray on bed liner.... yep, sure did. That was five years ago and I've dipped it into salt water many times with no issues at all. As with anything used in salt water, a thorough cleansing with fresh water is always in order. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
John Fyke	#4  Posted on 04/09/12 - 3:08 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	I wouldn't spend the extra money on a torsion axle. With that light of boat I'm not sure it would make much difference. John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
rivereagle	#5  Posted on 04/10/12 - 5:13 AM
Member Posts: 3 Comments: 0 Joined: 02/10/11	I appreciate the input, especially the advise on LPS#3. The trailer was built by Karavan Trailers and they sell replacement axles that are exact replacements, eliminating /minimizing mods.
Gamalot	#6  Posted on 04/10/12 - 9:37 AM
Member Personal Page Posts: 1086 Comments: 3 Joined: 06/21/10	I would be willing to bet the original axle Karavan used is available locally from any RV/trailer repair place. I agree on the exact replacement axle and on the coating after install.
Phil T	#7  Posted on 04/10/12 - 10:17 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	I agree that a torsen axle is a bit of an upgrade and not necessary. I am very surprised and dismayed that a 2005 Karavan axle is rusted through already. My 2003 Load Rite galvanized torsen axle is dunked in saltwater (I trailer) and shows practically no rust. I would not buy a Karavan replacement given the low quality. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT