|
Wrap around railing parts needed
|
| Labrat3 |
Posted on 11/07/11 - 6:37 PM
|
Member
Posts: 53
Comments:
1
Joined: 06/30/10
|
Me again:
I have a 1971 13 foot Sport Whaler (please see my Personal page for pics) and it has the wrap around stainless steel railing kit like the sourpuss that goes all around the back of the seat backs. One side of mine is damaged and I cannot find a replacement railing kit like the wraparound. I have tried the vendors on this site but they all have either the two unattached side railings OR the railing kits that wrap around the BOW of the boat but not wrap around the back of the seats.
Anyone out there know of either a company that sells the sourpuss rail kits OR will fabricate thye parts I need to fix mine?
Thanks for your help.
Regards, Sal 1971 13 foot Sport Whaler
|
| |
|
|
| Ice Cop |
Posted on 11/08/11 - 5:07 AM
|
Member
Personal Page
Posts: 85
Comments:
1
Joined: 08/24/09
|
Try Fred at the contact below. He distributes many original whaler parts and is fully capable of custom producing anything metal/railing you might need. His quality of work is second to none. If he cannot help you he will know exactly where you need to go.
I have dealt with him on many occasions and have referred many other whaler owners to him, none have been disappointed.
Good luck
CMI Marine Products - Railings and Fittings
Fred Caldwell
55 Woodrock Road
Weymouth, MA 02189
(781) 337-0733
1962 Custom
1989 120hp Evinrude looper |
| |
|
|
| Labrat3 |
Posted on 11/08/11 - 5:33 AM
|
Member
Posts: 53
Comments:
1
Joined: 06/30/10
|
Thank you Ice Cap ! That is exactly the info I have been looking for.
Regards,
Sal 1971 Sport 13
|
| |
|
|
| duf |
Posted on 11/08/11 - 12:23 PM
|
Member
Personal Page
Photo Albums
Posts: 840
Comments:
9
Joined: 04/22/07
|
i appreciate it as well, as i will be having a railing made to accomidate the bow pulpit i'm installing on my 25.
duf
|
| |
|
|
| Joe Kriz |
Posted on 11/08/11 - 1:25 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11447
Comments:
452
Joined: 03/18/05
|
duf,
I believe CMI sells the railing kit for the Bow Pulpit.
This kit fits the rails that have fittings and not for the bow rail that is welded one piece.
Talk to Fred.....
|
| |
|
|
| Ice Cop |
Posted on 11/08/11 - 7:00 PM
|
Member
Personal Page
Posts: 85
Comments:
1
Joined: 08/24/09
|
Fred sells both pre made rails and custom rails as well as towers, rocket launchers, rod holders, leaning posts,etc.
His custom work is generally considered the best in new england and I believe when you contact BW they will steer you towards him also for any older rails that they no longer stock or manufacture.
1962 Custom
1989 120hp Evinrude looper |
| |
|
|
| duf |
Posted on 11/09/11 - 1:04 PM
|
Member
Personal Page
Photo Albums
Posts: 840
Comments:
9
Joined: 04/22/07
|
Ok Joe, will do! Thanks all for the info!
Duf
|
| |
|
