1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Panther static motor mount bracket
Boatingnut	#1  Posted on 09/10/11 - 9:43 AM
Member Posts: 24 Comments: 2 Joined: 08/24/08	Boat 13ft sport cutout transom Motor Evinrude 40 hp 20' shaft weight approx. 190 lbs. has anyone used a panther static motor mount bracket to raise a long shaft motor? I am pushing the upper limits on the weight and want to know is anyone has done the same successfully. Product can be seen here http://www.pbsboatstore.com/store/p/1562-Static-Motor-Mount-Plate-Model-0405.html thanks
Joe Kriz	#2  Posted on 09/10/11 - 10:35 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	I haven't seen that brand mounted on a 13' yet... Here is another brand http://www.iboats.com/Transom-Elevato...w_id.40157 Here is a member that mounted the above T&R Marine bracket: http://www.whalercentral.com/infusion...er_id=4603
Boatingnut	#3  Posted on 09/12/11 - 10:57 AM
Member Posts: 24 Comments: 2 Joined: 08/24/08	Thanks joe. the T & R looks like the way to go. I will let you know how it works.
Joe Kriz	#4  Posted on 09/12/11 - 11:06 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	There is another more expensive one that fills in the entire transom. Unfortunately they don't seem to be in any hurry to show it on their website. http://www.kentfabrications.com/tions.com/ You can see it installed on several 13's in the personal page section.