1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1969 13' sport wood replacement
clint	#1  Posted on 04/17/07 - 7:46 AM
Member Posts: 2 Comments: 0 Joined: 04/02/07	i have a 1969 13' sport that needs all the wood replaced. I would like to put it back to the factory standard, could anyone let me know where i could get the original factory diagrams and dimensions for the wood templates? so i can duplicate it to the original form.
arthureld	#2  Posted on 04/17/07 - 9:26 AM
Member Personal Page Posts: 735 Comments: 7 Joined: 02/15/07	I'm a new 1966 13' owner so I don't know much, but maybe the diagram for the 13' sport seats and console in the Downloads area will help. You can get there by selecting Downloads -> Parts drawings Along the left of the window. Or use this link - Parts Drawings Good luck
clint	#3  Posted on 04/18/07 - 10:58 AM
Member Posts: 2 Comments: 0 Joined: 04/02/07	thanks i will check it out and keep posting as my progress moves forward
Nobleskydiver	#4  Posted on 11/13/07 - 8:19 PM
Member Posts: 18 Comments: 0 Joined: 11/11/07	Hi Gang, I bought a set from specialty marine, guys are nice, the finish on console I got was pretty rough, they have a shop glue 3" x 1" slats to make full size 12" x 1" seats and locker covers. I guess 12" x 1" or 5/4 x 6 foot is hard to come by or more dollars. I always like philipeen (sp) as it has more red in it, but I hear the wood supplied now is blonder, a light red stain would work, Not sure about african mahagony or Honduras mahagony. Since I bought the retro kit from Specialty, I am concerned with gluing up of slats, a waterproof glue is needed in any aps and with a large body -read-fat me boucing up over waves, I am concerned about the support. Specialty did a good job on flat work. I call it bright work from the old Trojan days and home Glen L & Chris boats. Eric responded to me about concerns and I am willing to see what we do to complete quality.
sraab928	#5  Posted on 11/14/07 - 4:11 AM
Member Project Albums Posts: 1282 Comments: 13 Joined: 12/27/05	Thanks for that update - If you can provide closeup pictures of the areas you are talking about I am sure we would all appreciate it. I have been watching their stuff on ebay and contemplating the plunge for redoing my 13 as a super sport. Its tough to drop a $1000 on workmanship you have not seen in person. Scott 1974 21' Revenge w Mercury 200 ProXS V8
Bri73whaler13	#6  Posted on 11/14/07 - 12:30 PM
Member Posts: 3 Comments: 0 Joined: 11/14/07	I'm try to find a local 13 super sport owner who will allow me to make some notes on the dimensions of the interior. I didn't think it would be this difficult, but if I am to make some drawings, I will post them on here asap.
MW	#7  Posted on 11/14/07 - 3:08 PM
Member Personal Page Posts: 1827 Comments: 10 Joined: 01/08/06	I rebuilt my friend's 13' in African Mahogony, the full 12" x 1" was no problem to find at "Wood-ply" Lumber, it was pretty easy work, (easier than my 15' for sure), and I actually enjoyed it more than redoing my boat because, it was easy to refabricate the wood interior, "Whaler" made the 13' like that for a reason, so WE could repair them easily in the drive way, and get back to boating. mw
Binkie	#8  Posted on 12/10/07 - 8:42 PM
Member Personal Page Posts: 2012 Comments: 0 Joined: 12/19/05	The 1976 and earlier 13 foot console was more detailed and a bit more difficult to build that the later ones, but it also was better looking. I built and sold 8, 13` Whaler African mahogany interiors last year, using the dimensions from a `76 console. I drew up some plans and sent them to Joe and Tom, but I don`t know what happened to them. If anyone wants a copy, just email me and I will run off a copy and send it snail mail. I never drew plans for my Nauset style console for 13-15 footers. Rich
ioptfm	#9  Posted on 12/11/07 - 6:38 PM
Member Personal Page Posts: 1533 Comments: 3 Joined: 10/28/06	My 15 has the same design that is in the parts drawing download and it was very easy to duplicate. Just take your time and be very patient. I used some of my old wood for a pattern and then used the downloaded drawinf and made a template out of cardboard, which worked pretty good Tom 1979 Sport 15'