1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1969 Johnson 85 HP Electrical Schematic
Jack Jordan	#1  Posted on 02/25/11 - 9:37 AM
Member Personal Page Posts: 152 Comments: 1 Joined: 11/23/10	I have a model 85ESL69E Johnson 85 HP that was a freebe. Compression is 120 psi per cylinder. Problem is the harness to the remote was cut and the key SW panel is trashed electricly. Does anyone know where I can find the sechmatics for this engine? Jack 1963 Custom 16, stencil #31048
Joe Kriz	#2  Posted on 02/25/11 - 1:02 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	I am not sure about the older models but take a look at this article. Scroll down to "Wiring Harness" http://www.whalercentral.com/articles...icle_id=72 Look at the colors of the wires as they should be fairly standard for OMC. Does your harness look like this? http://www.whalercentral.com/images/a...arness.jpg
Jack Jordan	#3  Posted on 02/25/11 - 2:20 PM
Member Personal Page Posts: 152 Comments: 1 Joined: 11/23/10	Mine has 10 wires and black connector. It's the hydro-electric drive model. Jack 1963 Custom 16, stencil #31048
Jack Jordan	#4  Posted on 02/25/11 - 2:23 PM
Member Personal Page Posts: 152 Comments: 1 Joined: 11/23/10	Looks like this one with the electric shift http://cgi.ebay.com/ebaymotors/Johnso...iesQ5fGear Edited by Jack Jordan on 02/25/11 - 2:24 PM Jack 1963 Custom 16, stencil #31048
luckydog	#5  Posted on 02/26/11 - 8:19 AM
Member Personal Page Posts: 82 Comments: 0 Joined: 03/01/06	Jack, I scanned the schematic that you need from my book, but as usual I can't seem to post it. Do yo have an email address that I can sent it to as an attachment?
Binkie	#6  Posted on 02/26/11 - 7:07 PM
Member Personal Page Posts: 2012 Comments: 0 Joined: 12/19/05	Go to this link -Antique outboard Motor Cub- http://www.aomci.org/ and ask the same question in their ask- a -member forum. you will get your shematic.
Jack Jordan	#7  Posted on 02/26/11 - 8:32 PM
Member Personal Page Posts: 152 Comments: 1 Joined: 11/23/10	Luckydog emailed wht I needed, Thanks Still no spark in the old stuff, considering the MSD canversion. Used MSD5 on ebay for $20 rather than the fragil OMC aftermarket parts for $475. Jack 1963 Custom 16, stencil #31048