1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Compression check of 60 hp Evinrude
clarky	#1  Posted on 10/10/10 - 2:02 PM
Member Posts: 11 Comments: 0 Joined: 12/19/09	All 3 clinders at aprox 135. Is that ok
Derwd24	#2  Posted on 10/10/10 - 3:40 PM
Member Posts: 1607 Comments: 9 Joined: 05/09/07	What year is it? Should be fine... How's it run overall? Dave - 1983 Outrage 22
Fishmore	#3  Posted on 10/10/10 - 3:50 PM
Member Personal Page Posts: 270 Comments: 0 Joined: 11/20/07	Sounds good to me. I go by if all cylinders are within 10% of each other you are good to go.
clarky	#4  Posted on 10/10/10 - 4:11 PM
Member Posts: 11 Comments: 0 Joined: 12/19/09	Thanks for the info. Its a 1995 that i have taken care of . I have a problem with the oil. It used a half of the resvor of oil while burning 8 gals of gas. today.
Derwd24	#5  Posted on 10/10/10 - 5:13 PM
Member Posts: 1607 Comments: 9 Joined: 05/09/07	Is it excessively smoky or is there a leak in the system somewhere? Dave - 1983 Outrage 22
clarky	#6  Posted on 10/10/10 - 5:24 PM
Member Posts: 11 Comments: 0 Joined: 12/19/09	Smoaky . cuts off at idle speed
Derwd24	#7  Posted on 10/10/10 - 5:47 PM
Member Posts: 1607 Comments: 9 Joined: 05/09/07	First thing to check is for an air leak in the fuel line/system. Aerated fuel entering the VRO pump makes it cycle much faster than usual and as a result it pumps much more oil than it normally would. Dave - 1983 Outrage 22
clarky	#8  Posted on 10/11/10 - 6:58 AM
Member Posts: 11 Comments: 0 Joined: 12/19/09	Dave, thanks so much for the info. clip on gas tank connector was not properly working . have replaced with nipply contected directly to hose. working fine now. you saved me many bucks. thanks
CES	#9  Posted on 10/11/10 - 7:28 AM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	clarky wrote: Dave, thanks so much for the info. clip on gas tank connector was not properly working . have replaced with nipply contected directly to hose. working fine now. you saved me many bucks. thanks Dave is an excellent source for good, quality information. He's helped me out several times. Glad you found your problem and learned from your experience. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker