Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
First time doing this and no engine manual. Stabil in the fuel, fog the cylinders, a little oil in through the plug holes, got that no prob. The cooling system is what gets me. If I have pieced this together I have to :
1) Loosen petcock to partially drain adapter plate. (There's only one, it a 1994).
2) Remove drain hose from transom drain nipple.
3) Load system with anti freeze....
That's where I need help, does this have to be done from the flush fitting in the drive ( I don't have access to a flushing kit), or can I take off the water supply hose (on the engine side of the filter) and use something like a siphon pump (or a pump on a drill) to get antifreeze through the system?
