1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1970's 19/21 Revenge/Outrage rod holders
Bob Kemmler JR	#1  Posted on 02/21/07 - 10:00 AM
Member Project Albums Posts: 269 Comments: 7 Joined: 10/10/05	I'm looking for dimensions or a template for the under gunnel rod holders on these models. I'm thinking we could almost make a scale drawing that could be printed out and used for a template. Any thoughts on this or dimensions to give? Are these rod holders the same ones used on any other models? I don't believe the one in the parts section is the same one used on the earlier hulls. Edited by Bob Kemmler JR on 02/21/07 - 10:15 AM On the hunt for a classic 19 or 21 Whaler
agargeros	#2  Posted on 02/21/07 - 8:05 PM
Member Posts: 11 Comments: 1 Joined: 08/29/06	You are correct that the under gunwale rod holders are different on the early 1970's Outrages. I also suspect, but am not certain, the rod holders on the 19's may be different from the 21's. I have a damaged set of originals from my 1973 Outrage 19 which are still good enough for a pattern, which I've been intending to do in the near future. I can also shoot a few photos if you're interested.
Bob Kemmler JR	#3  Posted on 02/23/07 - 2:25 PM
Member Project Albums Posts: 269 Comments: 7 Joined: 10/10/05	Sure that would be great. never hurts to add to the factory parts pictures on here, as well as the possibility of making a template from them. I want to use my 21 some before i go through the added expense of the sadle tanks. So i wouldn't mind having the holders under the gunnels till the. Thanks again On the hunt for a classic 19 or 21 Whaler
agargeros	#4  Posted on 03/06/07 - 2:18 PM
Member Posts: 11 Comments: 1 Joined: 08/29/06	I found the time to do a full scale drawing/tracing of the rod holders over the weekend, and have sent a .pdf to Joe Kriz for posting on this site. If you want this directly, please give me your email address.
Bob Kemmler JR	#5  Posted on 03/06/07 - 7:39 PM
Member Project Albums Posts: 269 Comments: 7 Joined: 10/10/05	Pm sent and thanks, can't wait to see them. We're you able to get the dimensions on the little "L" brackets and anything else thats needed to mount them? On the hunt for a classic 19 or 21 Whaler
Joe Kriz	#6  Posted on 03/07/07 - 11:25 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	I posted the drawing that Tony Argeros sent me in the >Downloads >Part Drawings section. It is on the second page and titled Under Gunwale Rod Holders for the Banana Hulls Models... Thanks Tony.... Edited by Joe Kriz on 03/07/07 - 11:27 AM
Bob Kemmler JR	#7  Posted on 03/10/07 - 10:05 AM
Member Project Albums Posts: 269 Comments: 7 Joined: 10/10/05	Just checked it out and must say Thanks Tony! On the hunt for a classic 19 or 21 Whaler
Bob Kemmler JR	#8  Posted on 04/21/07 - 9:35 AM
Member Project Albums Posts: 269 Comments: 7 Joined: 10/10/05	Just a note to add to this. I got a good look at Nick's(aka bigshot aka the judge) 1976 19 revenge and the 19 bananna boats rod holders are much different than the 21's. Joe you might want to edit it the title of this thread so people don't get confused. So if anyone has a 21 Outrage/Revenge, we still need parts drawings of those holders. On the hunt for a classic 19 or 21 Whaler