1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Engine RPMs drop while underway
HarleyFXDL	#21  Posted on 06/06/09 - 6:09 AM
Member Personal Page Project Albums Posts: 917 Comments: 30 Joined: 07/24/07	where is the water leaking from? Some engines used a gasket to seal the powerhead to the midsection. You might want to order it so it will be on hand. Kevin 1988 11' Super Sport, 1987 Johnson 15hp. If you think education is expensive, try ignorance "Vegetarian - old Indian word for bad fisherman."
modenacart	#22  Posted on 06/06/09 - 4:27 PM
Member Personal Page Posts: 741 Comments: 4 Joined: 02/28/09	Its hard to see, but it looks like its dripping from between the head and the block.
modenacart	#23  Posted on 06/07/09 - 12:06 PM
Member Personal Page Posts: 741 Comments: 4 Joined: 02/28/09	Cracked block. Power head has to come off. Time to decide if to put a rebuilt head on to fix the crack.
modenacart	#24  Posted on 06/08/09 - 2:52 PM
Member Personal Page Posts: 741 Comments: 4 Joined: 02/28/09	I am going with a rebuilt powerhead. I don't want to put anymore money into a powerhead that is 13 years old and has never been rebuilt and needs the block welded. I will cut back on some of the labor cost with trouble shooting. Right now my estimate to paint the engine and replace the powerhead with a rebuilt one is about 2k. I guess I have to spend my money on something.