Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
JRP wrote:
I would be very interested to see photos of how the boat sits in the water with this engine. At 531 lbs dry weight, that is a lot of motor hanging on the transom.
Any chance you could get us some photos of it in the water?
Not sure if the upload worked but here's a pic of the whaler.
Thanks for the photos. Very nice looking engine, especially in the white color.
Is your console/leaning post shifted farther forward than the OEM configuration? In one of the photos it almost looks that way, but it might just be the perspective.
I believe it's in the OEM spot, it is the OEM leaning post.i took the top off the aluminum supports and made the cutting board top. I need somewhere for my live well and this worked out great.
Surfgod82 attached the following image:
[118.59Kb]
Edited by Surfgod82 on 05/25/17 - 10:48 AM