Kicker motor on Outrage 22
|
Doug V |
Posted on 11/13/05 - 6:55 PM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
I have been busy the past couple of days on this little project. Its taken longer than it should have and I'm not quite done yet. Here's a couple of pictures of the progress so far. I still have to gussie up the brackets (radius the corners and brush out the stainless plate) and adjust the connector rod a little. The major part, the fabrication of the brackets and the engineering of the connector rod are pretty well whipped.
I used the Goldeneye steering kit, some 1/4" stainless plate and some heavy gauge sheet stainless both left over from a job of mine. I am more of a wood guy (carpenter by trade), so my metal working takes a little longer with the tools I have to work with. The 1/4" plate takes quite a bit of time to cut with a sawzall. Take a look...
[img] you need to put the http address in here [/img]
[img] you need to put it in here also [/img]
Doug Vazquez
Edited by Joe Kriz on 11/13/05 - 7:01 PM |
|
|
|
Doug V |
Posted on 11/13/05 - 6:56 PM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
Hmmm,
My guess on posting images was not a good guess. I will try to get them posted soon, if I can figure out how.
Doug
|
|
|
|
Doug V |
Posted on 11/14/05 - 9:13 AM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
Here is another attempt at posting pictures of the kicker connection.
http://photos.thedieselstop.com/showp...hoto=27542
http://photos.thedieselstop.com/showp...hoto=27541
Doug Vazquez
edited: 11/15
Sorry, guys, I am trying the url function so see if it will do what I think it will.
Doug
Hey, that worked! I will post the url to the finished piece.
Doug
Edited by Doug V on 11/15/05 - 10:27 AM |
|
|
|
Joe Kriz |
Posted on 11/15/05 - 10:15 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
Doug,
The URL you are using doesn't really point to a particular photo.
It points to a website with ALL of your photos. I think that is why it isn't working.
Edited by Joe Kriz on 11/15/05 - 10:18 AM |
|
|
|
Doug V |
Posted on 11/15/05 - 10:38 AM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
Here are the urls to the finished auxilliary steering connector:
http://photos.thedieselstop.com/showp...thecat=500
http://photos.thedieselstop.com/showp...thecat=500
Here are the pictures of the individual parts:
main engine bracket
http://photos.thedieselstop.com/showp...thecat=500
connector rod
http://photos.thedieselstop.com/showp...thecat=500
kicker motor bracket
http://photos.thedieselstop.com/showp...thecat=500
I'm a little embarrassed to say that I worked most of Saturday and Sunday on the rough in. Saturday was all for naught, the original design would work fine with both engines down, but tilting in all combinations was not possible. The hydraulic steering complicates the matter. Late Satuday was spent on redesign and relayout of the brackets.
Soooo, Sunday was spent on refabrication, Monday morning was spent on the finish work. A fun project.
Doug Vazquez
|
|
|
|
Joe Kriz |
Posted on 11/15/05 - 11:09 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
Doug,
You could put all your photos in your Personal Page and then put a link to them here.
Like this:
[img]http://whalercentral.com/images/ppimages/306/658steering_connector06.jpg[/img]
Edited by Joe Kriz on 11/15/05 - 11:11 AM |
|
|
|
Doug V |
Posted on 11/15/05 - 8:57 PM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
Ah hah!
Thanks Joe, I will remember that. I was trying to save the space on the personal page for nice pictures-like when I actually get the boat in the water, with a nice background or with me or a friend holding a big salmon.
I should have the new axles, brakes, and rollers on the trailer before the end of the week. Hopefully I can get some pictures uploaded to my personal page this Sunday.
Thanks again for the help,
Doug Vazquez
|
|
|
|
Joe Kriz |
Posted on 11/15/05 - 9:42 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
Doug,
As you can see, the place where you have your photos does not allow photo linking.
I would change if I were you, but then, that might just be me...
Lots of other ways to do things. As Jeff mentioned above, you could make it an attachment.
|
|
|
|
Jeff |
Posted on 11/16/05 - 6:11 AM
|
Member
Posts: 1987
Comments:
34
Joined: 04/02/05
|
I would recomond photobucket for storage of images. Easy to use and they allow direct linking.
1993 23' Walkaround Whaler Drive |
|
|
|
Doug V |
Posted on 11/16/05 - 9:04 PM
|
Member
Personal Page
Posts: 340
Comments:
3
Joined: 09/21/05
|
Joe and Jeff,
I see what you mean about the hosting of images. I will check into photobucket. This is off topic, but I will try attaching an image from my hard drive right now.
Upon edit:
I guess I still don't understand how to do that.
Doug
Edited by Doug V on 11/16/05 - 9:05 PM |
|
|