|
What Model Whaler Do I Have?
|
| JBfish |
Posted on 01/11/21 - 8:33 PM
|
Member
Personal Page
Posts: 5
Comments:
0
Joined: 01/04/21
|
Another photo of inside the cabin.
JBfish attached the following image:
[62.15Kb]
|
| |
|
|
| Phil T |
Posted on 01/12/21 - 7:02 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7043
Comments:
6
Joined: 03/26/05
|
That is one of two prototype Outrage 21.
It is the formerly known "Strike 3" out of Bodega Bay and was owned by three guys, the late Tony Wilde, Matt P and Warren T.
That is truly one of a kind.
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
| |
|
|
| robsonresearch |
Posted on 03/09/21 - 5:59 AM
|
Member
Posts: 6
Comments:
0
Joined: 07/06/20
|
robsonresearch wrote:
Yeah it is definitely not a 1964 Currituck. And agree, most likely a Nauset. I posted the pic of the boards in case some one had seen similar before. There was definitely some intent there as they aren’t just boards cut to the proper length.
Our plans are to enjoy it this season & then restore & probably make it a modified Sakonnet. Stern seats with a back would be nice, as would the RPS.
I’ll contact BW tomorrow & see what info they have on the stencil number.
Well I finally received a response from BW archives and as a surprise, it turns out their records show it as a 1962 Currituck! So obviously the interior was replaced at some time. Sadly my father-in-law passed last week from Covid so we are earnest in our efforts to get this boat in great shape and keep it.
robsonresearch attached the following image:
[24.81Kb]
|
| |
|
|
| thomaskmetz |
Posted on 03/29/21 - 4:29 AM
|
Member
Posts: 1
Comments:
0
Joined: 03/29/21
|
SO I bought a nice little 13 foot "Classic." There is no HIN number on the boat. Just "23155" stamped onto it. Looking to try and get some proper ID and age of the boat.
|
| |
|
|
| MG56 |
Posted on 03/29/21 - 7:27 AM
|
Member
Personal Page
Posts: 357
Comments:
0
Joined: 05/11/13
|
Scroll down on this page. Looks like a 1967, some on the list have pictures you may want to look at.
http://www.whalercentral.com/articles...cle_id=101
|
| |
|
|
| Joe Kriz |
Posted on 03/29/21 - 4:20 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11447
Comments:
452
Joined: 03/18/05
|
There were no HIN's until after November 1972
http://www.whalercentral.com/articles...icle_id=61
As MG56 mentions, looks like you have a 1967 year model.
This thread is however about what model a person may have.
What model do you have if you said you had a Center Console?
That would be a Custom model as there were no center consoles in those early years.
https://www.whalercentral.com/userpho...allery.php
|
| |
|
|
| IamSparticus |
Posted on 08/01/21 - 10:39 AM
|
Member
Posts: 5
Comments:
0
Joined: 07/31/21
|
Stencil #31525 found in forward locker
1963 Nauset 16'
IamSparticus attached the following image:
[103.92Kb]
|
| |
|
|
| Phil T |
Posted on 08/01/21 - 11:46 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7043
Comments:
6
Joined: 03/26/05
|
While it may have been a Nauset when it left the factory, without the OEM interior, it is referred to as a 16' Custom.
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
| |
|
|
| IamSparticus |
Posted on 08/01/21 - 12:59 PM
|
Member
Posts: 5
Comments:
0
Joined: 07/31/21
|
Gotcha, my uncle said it had that console when he got it
Thanks for the info.
|
| |
|
|
| Pathfinder14 |
Posted on 08/19/21 - 4:40 AM
|
Member
Posts: 2
Comments:
1
Joined: 08/09/21
|
I recently bought a 1965 Whaler that spent its life on Lake Winnipesaukee never having had bottom paint. Its stencil number is very clear. 32896. It seems that within a close group of stencil numbers they made different models. Were they making boats to order?
Edited by Pathfinder14 on 08/22/21 - 6:53 PM |
| |
|
|
| Tboyc7 |
Posted on 10/31/21 - 1:09 PM
|
Member
Posts: 3
Comments:
0
Joined: 10/31/21
|
I just picked up a project boat today. Based on the info I am reading on this site, based on the bow locker it is a 16 foot smirkless bow. I am hoping to figure out the year and model. There is a 5 digit number in the transom, however, I cannot figure out how to use this information. I believe the number is 38027 or 38827. Any information would be beyond helpful.
Thanks!!!
Tom
|
| |
|
|
| Joe Kriz |
Posted on 10/31/21 - 2:29 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11447
Comments:
452
Joined: 03/18/05
|
Hello Tom and welcome to Whaler Central.
Without a photo of your boat we cannot tell you for sure what model it is now.
See this info on "Custom" models.
https://www.whalercentral.com/forum/v...post_84902
and:
https://www.whalercentral.com/faq.php...p?cat_id=5
Also see this info on Stencil number like you show.
https://www.whalercentral.com/article...icle_id=61
38027 or 38827 would make it a 1968 year model.
Let us know what you find out.
|
| |
|
|
| Tboyc7 |
Posted on 11/01/21 - 9:36 AM
|
Member
Posts: 3
Comments:
0
Joined: 10/31/21
|
Thanks you!!! I have a feeling it is some sort of custom.
|
| |
|
|
| Tboyc7 |
Posted on 11/13/21 - 11:05 AM
|
Member
Posts: 3
Comments:
0
Joined: 10/31/21
|
Hi
Again thank you for your response. I have been trying to attach photos, however, the files are too big. I will continue to try. I have another question...I have 2 thru hulls in the middle of the hull. I am not sure if this was factory or an add on. I am thinking one was for a live well and not sure about the other. I am restoring this boat, and trying to learn more about the boat to make the job easier.
Tom
|
| |
|
|
| BWapi |
Posted on 12/22/21 - 9:10 PM
|
Member
Posts: 1
Comments:
0
Joined: 12/22/21
|
Hi,
I just purchased a 11ft BW. but the HIN has been removed so I have no idea what model 11t i have or the year. I don't know if somebody here could help me identify it. And also what is the function of the plastic covered hole. when I open I only see foam and or a hole in the foam
BWapi attached the following image:
[164.63Kb]
Edited by BWapi on 12/22/21 - 9:15 PM |
| |
|
|
| williamlindow |
Posted on 07/29/22 - 8:20 AM
|
Member
Posts: 2
Comments:
0
Joined: 07/29/22
|
This is my father's boat. I do not have access to the numbers as of yet. Any guesses Identifying possible year and
model would be very helpful. It was purchased by my father 10 years ago from the original owner and stored indoors.
It looks like a 1980's Striper that has be customized and the outboard looks like it from the late 1970's. Please help.
Thank you
UDPATE:
1978 Striper 15'
Hull Stencil 5A 24 32
BWC3434AM78C
1978 Johnson 55HP 55EL78S
I attached some new photos in my Boat INFO. Will get a thorough inspection of the engine and mechanicals
as well as spark plugs, oil and fresh fuel. Will need to look for bad wires in the engine for mice had camped out there at one time.
williamlindow attached the following image:
[84.35Kb]
Edited by williamlindow on 05/07/23 - 10:04 AM |
| |
|
|
| williamlindow |
Posted on 05/07/23 - 12:44 PM
|
Member
Posts: 2
Comments:
0
Joined: 07/29/22
|
Striper
williamlindow attached the following image:
[187.51Kb]
|
| |
|
|
| leftyjeb |
Posted on 08/07/23 - 5:54 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/07/23
|
Hi. First post!
I'd love to know any/all info about this boat. The owner is calling it a 1984 Revenge 22, but note the curved windshield. I think it's a 1984 Outrage Cuddy 22. I did a search here for that model, but it didn't yield anything. I'd really like to hear any informed opinions about this rig.
Thanks,
Jeb
leftyjeb attached the following image:
[135.46Kb]
|
| |
|
|
| Joe Kriz |
Posted on 08/07/23 - 12:44 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11447
Comments:
452
Joined: 03/18/05
|
Jeb,
You are half correct with the Cuddy but not the Outrage.
It is a Revenge Cuddy with the curved windshield.
That would be 1983-1984 only.
See our information here and the description:
https://www.whalercentral.com/userpho...lbum_id=57
Joe Kriz attached the following image:
[88.06Kb]
Edited by Joe Kriz on 08/07/23 - 12:51 PM |
| |
|
|
| leftyjeb |
Posted on 08/07/23 - 1:46 PM
|
Member
Posts: 5
Comments:
0
Joined: 08/07/23
|
Joe Kriz wrote:
Jeb,
You are half correct with the Cuddy but not the Outrage.
It is a Revenge Cuddy with the curved windshield.
That would be 1983-1984 only.
See our information here and the description:
https://www.whalercentral.com/userpho...lbum_id=57
Thanks so much. I hope to be the next owner of this classic. I'll check in once it happens.
|
| |
|
